Hey all,
The names Ross, am 25, and live in Armagh, N. Ireland. Have been a signed up to MRC for a couple of years but only recently became a \'proper member\'.
Since catching the rotary bug i have always wanted a series 13BT japper! So ever since the beginning of \'09 i got in contact with Andy Gray @ powervehicles.com, gave him a spec outline and asked him to look out for a FC for me.
Then whilst visiting Japan with the lads on holiday Andy took me to see what he had found. I instantly fell in love! It was a bit higher spec (and therefore more yens) than i was looking. But hey, spec it big \'n\' you\'ll never get bored!!
So forked out the yen, waited 3 months, forked out some euro, payed the queen and i have me a FC3S (and no money)!!
the spec is as follows: -
ERC Side Port
T04R Turbo Kit
RE Amemiya Intercooler
HPI Air Cleaner
Trust Oil Catch tank
Knight Sports Oil Cap
Aftermarket Engine Torque Damper
Twin alternator Pulley
NGK Racing Plug Cord
Cusco Brake Master Stopper
HKS EVC 5 boost controller
HKS F Con V Pro Ver 2.1
Optima Battery
Koei Radiater
Stillway Twin Oilcoolers (NOR+ARC)
FD3S Electric Fan
Apex GT Spec Reserve Tank
5 Point Roll Cage
Cusco 3 Point Rear Tower Bar
SP-G Recaro Seat
Momo Steering Wheel
ERC Widebody Kit
Pansports G7 Wheels
Aftermarket Exhaust
Apex ECV (exhaust flap, handy tool)
JIC Magic Coilovers
Aftermarket Front grooved Rotors
Aftermarket Pads
Cusco Front Lower brace
Earls Brake Lines
Short shift kit
OS Giken Super Single Clutch
lightened flywheel
rear arm fronts are rose jointed
rear diff arm rose jointed
HKS external wastegate
Greddy blow off valve
uprated secondary injectors
any who, few pics for her in japan: -
(http://i494.photobucket.com/albums/rr305/ef2paddy/GetAttachment.jpg)
(http://i494.photobucket.com/albums/rr305/ef2paddy/GetAttachment1.jpg)
(http://i494.photobucket.com/albums/rr305/ef2paddy/GetAttachment7.jpg)
(http://i494.photobucket.com/albums/rr305/ef2paddy/GetAttachment3.jpg)
(http://i494.photobucket.com/albums/rr305/ef2paddy/GetAttachment4.jpg)
(http://i494.photobucket.com/albums/rr305/ef2paddy/GetAttachment5.jpg)
(http://i494.photobucket.com/albums/rr305/ef2paddy/GetAttachment6.jpg)
(http://i494.photobucket.com/albums/rr305/ef2paddy/GetAttachment8.jpg)
after picking her up from dublin docks
(http://i494.photobucket.com/albums/rr305/ef2paddy/IMG_1109.jpg)
(http://i494.photobucket.com/albums/rr305/ef2paddy/IMG_1111.jpg)
next, MOT time.......needed trackrod end, because of split boot, a few things tightened and fastened, plus MPH on the speedo
(http://i494.photobucket.com/albums/rr305/ef2paddy/IMG_1117.jpg)
on the MOT lift.........everything 100%, well apart from emmisions being a tad out!:Giggle 8.19%CO2 (limit 3.5%) & 1229ppm HC (limit 1200ppm)
(http://i494.photobucket.com/albums/rr305/ef2paddy/IMG_0109.jpg)
oh also have a series 4 6-port missile. It has good shell, so keeping it in the shed til decide to do something with it...PP, trackcar?? who knows! any ideas??
(http://img29.imageshack.us/img29/4291/08062008104.jpg)
excuse the mates hole!:wiggle
(http://img30.imageshack.us/img30/8991/08062008105.jpg)
Laters,
Ross
Hey Ross. Like I\'ve said before Nice Car. It looks proper clean and I\'m sure you\'ll have a lot of fun with her.
If you could get some pic\'s of the front mount install for me you\'d make my day. I have one waiting to go on at some point. I\'m not sure I have all the pipework though looking at yours.
Anyway back on topic. Thats a bad ass FC enjoy mate!
Nice motors - guessing you like blue cars - but they do look good :cheers
Excedllent ride :yes
Quote from: TiddlesRX7;665585If you could get some pic\'s of the front mount install for me you\'d make my day. I have one waiting to go on at some point. I\'m not sure I have all the pipework though looking at yours.
Anyway back on topic. Thats a bad ass FC enjoy mate!
Cheers tiddles, will pull a few things off tonite and get a couple of pics gathered up! Pipe work doesn\'t seem that complicated, easy fabed.
Cheers prof, don\'t overly like blue cars, just turned out they happened to be similar in colour! Wouldn\'t change it though
nice spec! thats gonne be quick! :)
Quote from: L18M;665645nice spec! thats gonne be quick! :)
cheer Liam, yeah, had it out for a run the other day, she\'s a bit of a handful!!
Tiddles, as promised (sorry about previous delay!). Let me know if these are any good or if you need any more or measurements, etc.
pics go in order from inlet mani back through system to turbo
Re-am. Inlet nesty thing
(http://i494.photobucket.com/albums/rr305/ef2paddy/IMG_1190.jpg)
main coldside shiney pipe in photos above
goin past rad to cold side of IC
(http://i494.photobucket.com/albums/rr305/ef2paddy/IMG_1185.jpg)
following bend
(http://i494.photobucket.com/albums/rr305/ef2paddy/IMG_1184.jpg)
pipe into cold side
(http://i494.photobucket.com/albums/rr305/ef2paddy/IMG_1183.jpg)
hot side of IC (bit tight in there)
(http://i494.photobucket.com/albums/rr305/ef2paddy/IMG_1188.jpg)
hot side from turbo
(http://i494.photobucket.com/albums/rr305/ef2paddy/IMG_1187.jpg)
(http://i494.photobucket.com/albums/rr305/ef2paddy/IMG_1186.jpg)
FMIC
(http://i494.photobucket.com/albums/rr305/ef2paddy/IMG_1189.jpg)
(http://s494.photobucket.com/albums/rr305/ef2paddy/?action=view¤t=IMG_1189.jpg)
Wow thank you. Nice detailed photo\'s. From the looks of it I have roughly half the pipework needed. Well enough for the cold side looking at yours. I think mine must be a copy intercooler (I can\'t see anything cast into it to identify it) as the hot side intake is slightly different to yours I think from memory. Anyway thanks again thats a big help. If I get stuck along the way I may give you a shout if thats ok.
You have tertiary injectors that aren\'t connected? lol
Nice cars mate :)
btw, are those twin oil coolers?
Quote from: TiddlesRX7;665791Wow thank you. Nice detailed photo\'s. From the looks of it I have roughly half the pipework needed. Well enough for the cold side looking at yours. I think mine must be a copy intercooler (I can\'t see anything cast into it to identify it) as the hot side intake is slightly different to yours I think from memory. Anyway thanks again thats a big help. If I get stuck along the way I may give you a shout if thats ok.
no problem tiddles, pleasure. well sure your only missing a small bit then, you fab it up like jono!lol yeah shout me, will help you if i can
Quote from: m1tch;665796You have tertiary injectors that aren\'t connected? lol
Nice cars mate :)
btw, are those twin oil coolers?
lol yeah they are there from a previous spec or/and to block the holes. supose it leave further juice scope for the future.....not that she bloody needs it!lol:burnout
twin stillway coolers, plus nice anodised connections and braided hoses, me likes!:D
Quote from: turbointhebrain;665810no problem tiddles, pleasure. well sure your only missing a small bit then, you fab it up like jono!lol yeah shout me, will help you if i can
lol yeah they are there from a previous spec or/and to block the holes. supose it leave further juice scope for the future.....not that she bloody needs it!lol:burnout
twin stillway coolers, plus nice anodised connections and braided hoses, me likes!:D
Ah ok lol I will be running a third rail for my turbo setup lol so keep them as you might need them :) What injectors do you have in the car at the moment? such a large turbo might be needing the extra fueling, what A/F is it mapped to? Also be careful if its been mapped in japan as the will use 100RON fuel!
What power is the stillway coolers rated to? I havn\'t found a set of twin coolers that are more effiecent than the OEM FC ones as the OEM cooler is rated to about 500bhp :)
Quote from: m1tch;665837Ah ok lol I will be running a third rail for my turbo setup lol so keep them as you might need them :) What injectors do you have in the car at the moment? such a large turbo might be needing the extra fueling, what A/F is it mapped to? Also be careful if its been mapped in japan as the will use 100RON fuel!
What power is the stillway coolers rated to? I havn\'t found a set of twin coolers that are more effiecent than the OEM FC ones as the OEM cooler is rated to about 500bhp :)
Oh big questions now, don\'t know the answers to them all! In terms of injectors, it defo has uprated secondarys, volume wise unsure?! Is it easy to tell from looking at them? Don\'t know what a/f it is mapped to either?!
Yeah I understand the octane difference between here n japland. For normal use running 97ron, an hard driving will b 97 + millers cvl booster
in terms of the oil coolers, don\'t know what they are rated to? Would it say on them or will it take a bit more research?
QuoteAh ok lol I will be running a third rail for my turbo setup lol so keep them as you might need them
I\'d do you some sort of swap for my FMIC set up with the RE elbow (with 2 extra injector holes) for your top mount if your interested. Go on M1tch I know you want to;)
Quote from: TiddlesRX7;665918I\'d do you some sort of swap for my FMIC set up with the RE elbow (with 2 extra injector holes) for your top mount if your interested. Go on M1tch I know you want to;)
PM me the specs of it and I will see, I am thinking of getting a flat mounted intercooler rather than a FMIC though, but try and temped me lol although the RE-A elbow isn\'t the best for flow :( and the FMIC needs to be rated to 650bhp
Will do. :)