Mitch has :D Look what just arrived:
(http://i93.photobucket.com/albums/l49/m1tch_2006/DSC00695.jpg)
Its a Greddy T88 34D :) aaaaaand:
(http://i93.photobucket.com/albums/l49/m1tch_2006/DSC00696.jpg)
A Greddy 55mm wastegate :D
(http://i93.photobucket.com/albums/l49/m1tch_2006/DSC00697.jpg)
WINNER
LOOSER.. PEPSI puke.. Coca Cola FTMFW!!! :p
the 34D doesn\'t look all that big..
Quote from: L18M;662435LOOSER.. PEPSI puke.. Coca Cola FTMFW!!! :p
the 34D doesn\'t look all that big..
Its all I could find lol
Yeah, the T88 34D is only rated to 850bhp :( the new T88 is rated to 1000bhp *sigh*
It looks like a mincemeat machine :Giggle
Quote from: Prof;662438It looks like a mincemeat machine :Giggle
Need to make sure that my HUGE RE-A filter is put on properly then, don\'t really want to hoover up pedestrians and then burn them with the screamer pipe...would I? :Giggle
Quote from: m1tch;662445Need to make sure that my HUGE RE-A filter is put on properly then, don\'t really want to hoover up pedestrians and then burn them with the screamer pipe...would I? :Giggle
hmm.. your own portable sheesh kebab machine. nice :cheers
then get mayo from the rad cap :rollin
Quote from: L18M;662447hmm.. your own portable sheesh kebab machine. nice :cheers
then get mayo from the rad cap :rollin
And also cook it on the exhaust flames :D
so you gunna get a bridge port with that? it looks mahusive!!
Looks good! does this mean that your fully ported turbo with 360 degree thrust bearings is up for grabs?:D
Looking Good Dude....enjoy!!!!!!!
Quote from: L18M;662435the 34D doesn\'t look all that big..
Maybe not, but they feel quite nice... hang on, wrong thread... :rollin
Nice looking tubby Mitch :Giggle what porting you doing to the block? Will it be ready for the summer season? :wave
Quote from: dthebuk;662524so you gunna get a bridge port with that? it looks mahusive!!
You dont need a bridge to make power!!
no, but it means you dont have to wait a week for it to spool :)
Quote from: 12at;662604You dont need a bridge to make power!!
I am going for the special extended streetport to keep the drivability, JM garage is going to build me a custom manifold, I might run with stock ports and my top mount to begin with, but I have a lot of upgrades to do before that, fuel upgrade, brake upgrade to go in, WI will also go in :)
I need to get a new downpipe in as well, the turbo exit is 3.5", so I need to get a new downpipe made :D Prof also has a 4 port boost solinoid as my wastegate can handle it :D
Annoyingly my engine is still strong, so I don\'t want to rebuild the engine just yet, I might upgrade the actuator on the turbo to the bolt on HKS actuator as with the porting the OEM actuator can\'t cope with the awesomeness of the turbo :P
So I think I will bolt this turbo on when I have sorted out the rest of the support systems, might need to run 2 walbro pumps and a custom fuel setup :)
Yes the rebuilt OEM turbo (which will probably have a HKS actuator on it) will be up for sale, cost me £500 for all the upgrades on it, might just the OEM turbo this year, see if I can get into the 13s with it to show its possible lol
can you upgrade to a 13b rew on a fc...and how hard is it?
Quote from: Ed_RX7;662722can you upgrade to a 13b rew on a fc...and how hard is it?
need engine mount kit which will cost about £150. then go microtech or pfc i\'d imagine and fd loom?
Quote from: Ed_RX7;662722can you upgrade to a 13b rew on a fc...and how hard is it?
I would probably run RE plates and RE inlet manifold for the extra flow
It has been done. T2rew did it to his FC. The car is now owned by Driftmotion on here.
Quote from: TiddlesRX7;662807It has been done. T2rew did it to his FC. The car is now owned by Driftmotion on here.
I might just stay with FC parts else I might as well just drop in an RE-A lump, not looking for all out power, im planning not to max out any components
well if you want one i have one for sale....trick seals...etc...built and ported by JayDee...bone under 3000m miles since rebuild...can be heard running and comp test will be done for new owner.
Quote from: Ed_RX7;662840well if you want one i have one for sale....trick seals...etc...built and ported by JayDee...bone under 3000m miles since rebuild...can be heard running and comp test will be done for new owner.
Nah its ok, im going to JM garage for me work, I would rather know what the engine has in it and built to my specs.
The FC3S that made 850bhp seems to be running the OEM FC inlet manifold.