Text only | Text with Images

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: pigeon on October 08, 2009, 08:38:32 PM

Title: Cooling fans engagement point on the power fc
Post by: pigeon on October 08, 2009, 08:38:32 PM
With the base map on the power fc what water temp should activate the cooling fans?
 
Cheers Adam
Title: Cooling fans engagement point on the power fc
Post by: Oliver on October 08, 2009, 09:17:48 PM
Mine kick on at 94c
Title: Cooling fans engagement point on the power fc
Post by: pigeon on October 09, 2009, 07:28:10 PM
Ok cheers. I saw 96c whilst doing my idle learn and the fans still didnt kick in. Seems a bit high at 96c.
Title: Cooling fans engagement point on the power fc
Post by: ro284 on October 09, 2009, 08:05:29 PM
As i understand it the cooling fans are still controlled by the 106\'C thermoswitch, on an FD, if you have a Apexi they can be set to come on at around 87\'C but this has to be done with a Datalogic, i had this done on mine at one time, i noticed the Apexi was more accurate reading temp\'s than an aftermarket gauge
Title: Cooling fans engagement point on the power fc
Post by: peterwolds on October 09, 2009, 08:05:50 PM
Quote from: pigeon;646954Ok cheers. I saw 96c whilst doing my idle learn and the fans still didnt kick in. Seems a bit high at 96c.

95 should kick in if set up right
Title: Cooling fans engagement point on the power fc
Post by: pigeon on October 13, 2009, 02:25:11 AM
On second looks the fans kicked in at 94c. I was being a dope the first time round lol.
Cheers though guys :-)
 
Adam
Text only | Text with Images