Text only | Text with Images

Mazda Rotary Club

Cars by Model Type => 2nd generation RX-7's => Topic started by: MiniMike16V on August 26, 2009, 10:38:21 PM

Title: Auxillary Belts + Coolant Filler Cap
Post by: MiniMike16V on August 26, 2009, 10:38:21 PM
As the title says, I have a couple questions about the above. I\'m in need of new Aux\' belts, and as i\'ve noticed they\'re all different! Also in need of a new coolant filler cap (the one at the top of the engine in the rad pipe) as mine is a little leaky.
 
Does anyone have the Mazda part numbers for these parts that I can quote when ordering them, and also where is the best place to get them? Do Mazda still provide parts for FC\'s?
 
Thanks :D
Title: Auxillary Belts + Coolant Filler Cap
Post by: TiddlesRX7 on August 26, 2009, 10:58:16 PM
An MX5 Radiator cap fit the FC so I\'ve been told. So they should be easy enough to find and the belts you should be able to pick up from your local autoparts shop. If not give one of the vendors on here a shout. They defo know what they are talking about.
Title: Auxillary Belts + Coolant Filler Cap
Post by: dthebuk on August 26, 2009, 11:55:42 PM
TII or egi?

ive got a TII rad cap pete sent me for my egi when it had troubles. Didn\'t work though, think they are every so slightly different.

So if its a TII give me your address and ill send you the cap
Title: Auxillary Belts + Coolant Filler Cap
Post by: MiniMike16V on August 28, 2009, 05:39:45 PM
I\'ll have an ask about :)
 
Thanks guys
 
Afraid ive got an EGi. Thanks for the offer though :cool
Title: Auxillary Belts + Coolant Filler Cap
Post by: m1tch on August 28, 2009, 05:56:57 PM
Quote from: MiniMike16V;638265I\'ll have an ask about :)
 
Thanks guys
 
Afraid ive got an EGi. Thanks for the offer though :cool

Perhaps you should upgrade to a turbo, then you won\'t have such problems :Giggle
Title: Auxillary Belts + Coolant Filler Cap
Post by: dthebuk on August 28, 2009, 06:28:49 PM
Quote from: MiniMike16V;638265Afraid ive got an EGi. Thanks for the offer though :cool

If you cant find a cap speak to MRP. I got one from them when i had my egi
Title: Auxillary Belts + Coolant Filler Cap
Post by: dthebuk on August 28, 2009, 06:29:31 PM
even got the box still, the product code is ADC49902
Title: Auxillary Belts + Coolant Filler Cap
Post by: MiniMike16V on September 05, 2009, 10:39:47 AM
Thanks :Thumbs-up
 
I\'ve dropped them an email, and hopefully should get something back soon.
 
Regards
 
Mike
Title: Auxillary Belts + Coolant Filler Cap
Post by: gurteen0 on September 09, 2009, 07:09:48 PM
Hi mate you are better off going direct to Madza for the belts .Last year I did a service and bought the belts from a Auto store and they slipped a few times. Went to Madza paid only a few extra pounds and they were 100% with no issues so lesson learned for me . I thought they would be expensive but I was plesantly surprised :wiggle
 
 
Quote from: MiniMike16V;637879As the title says, I have a couple questions about the above. I\'m in need of new Aux\' belts, and as i\'ve noticed they\'re all different! Also in need of a new coolant filler cap (the one at the top of the engine in the rad pipe) as mine is a little leaky.
 
Does anyone have the Mazda part numbers for these parts that I can quote when ordering them, and also where is the best place to get them? Do Mazda still provide parts for FC\'s?
 
Thanks :D
Text only | Text with Images