Text only | Text with Images

Mazda Rotary Club

Cars by Model Type => 2nd generation RX-7's => Topic started by: Adam fc on August 21, 2009, 07:20:00 AM

Title: Egi/tII clutch
Post by: Adam fc on August 21, 2009, 07:20:00 AM
Hi,

The clutch on the egi is buggered:(,but i don\'t  know weather a tII clutch would fit an egi or not??
 I don\'t really wana spend out on an egi clutch when im looking to swap my lump for a T11 this winter so just wondering if the two are interchangeable or not?? thanks
Title: Egi/tII clutch
Post by: dthebuk on August 21, 2009, 07:22:21 AM
MRP might be able to help as they sell both types of clutches
Title: Egi/tII clutch
Post by: Adam fc on August 21, 2009, 07:23:28 AM
shweet cheers:)
Title: Egi/tII clutch
Post by: Brett on August 21, 2009, 07:24:01 AM
IIRC they have a different spline pattern...
Title: Egi/tII clutch
Post by: Adam fc on August 21, 2009, 07:25:32 AM
bugger,oh well more money going in the wrong direction:)
Title: Egi/tII clutch
Post by: dthebuk on August 21, 2009, 07:38:32 AM
maybe try and find where the one that was being broken went to? Maybe the guy\'ll sell the clutch
Title: Egi/tII clutch
Post by: Adam fc on August 21, 2009, 07:40:20 AM
cool,which car was this?? ive been out of the loop for a while.cheers
Title: Egi/tII clutch
Post by: dthebuk on August 21, 2009, 07:44:15 AM
http://www.mazdarotaryclub.com/forums/showthread.php?t=59256
Title: Egi/tII clutch
Post by: pdtaylor18 on August 21, 2009, 09:08:19 AM
Also make sure it is the clutch and not the master cylinder as they are notorious for failing. Worth a really good bleed just in case.
Title: Egi/tII clutch
Post by: L18M on August 21, 2009, 01:24:02 PM
i got a TII clutch kicking around in good condition if u need later on
Title: Egi/tII clutch
Post by: Adam fc on August 21, 2009, 06:19:10 PM
yeah thats a point,ill have a look.I sent MRP an email and they got back to me in good time saying--

[FONT=\'Calibri\',\'sans-serif\']Hi Adam,[/FONT]
 
  [FONT=\'Calibri\',\'sans-serif\']I know the part numbers are different but this is probably the clamping force of the pressure plate,[/FONT]
 
  [FONT=\'Calibri\',\'sans-serif\']From memory one will fit the other, best bet is to lay them side by side to make sure,  [/FONT]
 
  [FONT=\'Calibri\',\'sans-serif\']Also you will need to use the release bearing from the TII if you do use the TII Clutch,[/FONT]
 
  [FONT=\'Calibri\',\'sans-serif\']It would maybe be an idea   to ask  this question out on Mazdarotaryclub.com as well[/FONT]
 
  [FONT=\'Calibri\',\'sans-serif\']Hope this helps [/FONT]
 
 
  [FONT=\'Calibri\',\'sans-serif\']Kind REgards[/FONT]
 
  [FONT=\'Calibri\',\'sans-serif\']Clive Haynsford[/FONT]




[FONT=\'Calibri\',\'sans-serif\']so i think ill have a look round for a 2nd hand egi clutch if it isn\'t the master cylinder.Although i was doing a fair amount of \'\'clutch kicking\'\' before hand. God that sounds gay...JDM Tight Yo....
[/FONT]
Title: Egi/tII clutch
Post by: L18M on August 22, 2009, 12:17:24 AM
i can send u pics of TII clutch if it helps to compare against an egi clutch?
tho i dont think i have a release bearing (around £40 i think new).
Title: Egi/tII clutch
Post by: dthebuk on August 22, 2009, 07:23:05 AM
i can send you my old TII clutch if you wish? You wont be able to use it though, it got worn all the way down to the rivets

(http://i973.photobucket.com/albums/ae213/dtheb_uk/PICT0008.jpg?t=1250922168)
Title: Egi/tII clutch
Post by: Adam fc on August 23, 2009, 09:25:20 PM
wow,did it rite the flywheel off??
Title: Egi/tII clutch
Post by: dthebuk on August 24, 2009, 07:23:45 AM
nope, was surprisingly good. Destroyed the clutch cover though. It just stopped working all of a sudden when it went. The last thing i expected was needing a new clutch :P
Title: Egi/tII clutch
Post by: Adam fc on August 24, 2009, 09:50:29 AM
i bet the engagement was good on that :),hows ur t2 coming on??
Text only | Text with Images