Text only | Text with Images

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: rx7ben on June 26, 2009, 05:21:32 PM

Title: After more power
Post by: rx7ben on June 26, 2009, 05:21:32 PM
Hey guys
 
Im on the hunt for more power without spending £0000. Im thinking of getting a fuel pump and new injectors but i have no idea witch ones i should go for. So thats where you lovely guys come in. Could you please push me in the right way of what products to get and from where.
 
At the mo i currently have Filter, Apexi pfc, inercooler,Exhaust with decat. So would the above give a good increase.
 
Cheers :mmmm
Title: After more power
Post by: Aubec on June 26, 2009, 08:52:10 PM
Out of interest what are you mapped to at the moment?
Title: After more power
Post by: AtomicRex on June 26, 2009, 09:09:01 PM
We have new fuel rails coming out in the next few weeks for both primary, secondary...and fuel rails for the new LIM we have had produced
 
(http://www.atomicrex.co.uk/downloads/Fuel%20Rail/LIM%20and%20Fuel%20Rail.jpg)
Title: After more power
Post by: m1tch on June 26, 2009, 09:10:48 PM
Getting a chipped ECU or Power FC would be best as it will unlock the potential of the current setup, don\'t forget to upgrade the ancilleries such as the fuel pump and radiator, most engines fail as the ancilleries can\'t cope with the extra load on them
Title: After more power
Post by: rx7ben on June 27, 2009, 08:06:41 AM
Quote from: Aubec;620415Out of interest what are you mapped to at the moment?

0.8 bar at the mo
Title: After more power
Post by: rx7ben on June 27, 2009, 08:07:49 AM
Quote from: m1tch;620421Getting a chipped ECU or Power FC would be best as it will unlock the potential of the current setup, don\'t forget to upgrade the ancilleries such as the fuel pump and radiator, most engines fail as the ancilleries can\'t cope with the extra load on them

 
Allready running an Apexi :Giggle
Title: After more power
Post by: Aubec on June 27, 2009, 10:04:47 AM
Sorry, I meant power wise, since you say you want more power but haven\'t mentioned what you\'ve squeezed out of your current mods!
Title: After more power
Post by: rx7ben on June 27, 2009, 10:13:45 AM
Quote from: Aubec;620517Sorry, I meant power wise, since you say you want more power but haven\'t mentioned what you\'ve squeezed out of your current mods!

 
Ohhhh Not shaw what power im runing but im on 0.8 bar
Title: After more power
Post by: rx7ben on June 27, 2009, 10:16:17 AM
Quote from: AtomicRex;620419We have new fuel rails coming out in the next few weeks for both primary, secondary...and fuel rails for the new LIM we have had produced
 
(http://www.atomicrex.co.uk/downloads/Fuel%20Rail/LIM%20and%20Fuel%20Rail.jpg)

Is there any prices on these and what else would i need to run with it.
 
Thanks
Title: After more power
Post by: Aubec on June 27, 2009, 11:08:13 AM
Hard to know what to say to you mate, has the PFC actually been mapped for the mods you are running? If not a quick session at one of the RX7 tuners will add horses, a fuel rail and larger injectors isn\'t going to help much without getting remapped to take advantage of them anyway
Title: After more power
Post by: AtomicRex on June 27, 2009, 11:16:44 AM
Quote from: rx7ben;620525Is there any prices on these and what else would i need to run with it.
 
Thanks

We will have a price on these next week.  They have to be ready as we are looking to run them on 2 cars at Rotorstock
Title: After more power
Post by: rx7ben on June 27, 2009, 11:38:51 AM
Quote from: Aubec;620539Hard to know what to say to you mate, has the PFC actually been mapped for the mods you are running? If not a quick session at one of the RX7 tuners will add horses, a fuel rail and larger injectors isn\'t going to help much without getting remapped to take advantage of them anyway

 
The car has been mapped to suit the mods. I would allso have tweaked when fitting more mods.
Text only | Text with Images