Print Page - Any Help installing HKS EVC

Title: Any Help installing HKS EVC
Post by: Glen.mclean on April 18, 2004, 10:15:55 PM

Hi i have been trying to work out how to fit my HKS evc , i have attached 4 pics , i dont know what one to pic of the 3 choices , the forth pic is of the turbo and stuff , if you could direct me what to do on there , any help would be great

cheers
glen

Title: Any Help installing HKS EVC
Post by: Glen.mclean on April 18, 2004, 10:16:27 PM

Title: Any Help installing HKS EVC
Post by: Glen.mclean on April 18, 2004, 10:19:01 PM

Title: Any Help installing HKS EVC
Post by: Glen.mclean on April 18, 2004, 10:19:39 PM

there only was 2 pics that i can find now , if the RX7 is neither i will have to find the other

Title: Any Help installing HKS EVC
Post by: RX rich on April 19, 2004, 09:28:44 AM

hi
ive not long fitted one to my T2 its not that bad fitting one as you may think, which EVC is it 4 or 5?
if you go on //www.hkseurope.com you will find installation instructions for the EVC or you can ring them on 01480 861997 the guys at HKS are very helpful
hope this helps :D

Title: Any Help installing HKS EVC
Post by: Glen.mclean on April 19, 2004, 02:07:41 PM

Hi , it is a IV , i have the manual for it , but i am kinda wondering where on the turbo to attach it

Title: Any Help installing HKS EVC
Post by: RX rich on April 19, 2004, 03:56:04 PM

ahh...ive got a V which i think is different give HKS a ring they should be able to help

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: Glen.mclean on April 18, 2004, 10:15:55 PM