Hi guys, I thought I might try and start another possible sticky thread regarding wheel pattern type on the FC3S as it can be quite hard to know what rims you see on other cars are, if everyone can post up photos of their cars with possibly different angles with the make, model and size of the alloys its running, other people can see what they look like on an FC :)
Thanks guys :D
Its easier than trying to photoshop wheels on :yes
What\'s the PCD of FC hubs?
TII\'s and some later EGI\'s were 5x114.3 offset is 35-40 IRC
Cool, I\'ll have a look for some wheels then for this thread. For what it\'s worth, 5x114.3 is the same fitment as Nissan S-bodys, Mitsu Starions etc.
I was meaning wheel styles eg:
Rota Grid drift 18"
(http://i46.photobucket.com/albums/f144/mc_carthy/FC%20RX7/Photo-0029.jpg)
(http://i46.photobucket.com/albums/f144/mc_carthy/FC%20RX7/Photo-0032.jpg)
Ive got 16" mazdaspeed MS01\'s on mine
(http://i106.photobucket.com/albums/m272/gandy78/DSC00068.jpg)
18" Advan RG
(http://i287.photobucket.com/albums/ll142/grahamkane84/Mazda%20RX7%20FC3S/10.jpg)
(http://i287.photobucket.com/albums/ll142/grahamkane84/Mazda%20RX7%20FC3S/DSC01835.jpg)
I\'ve got some MazdaSpeed MS747\'s waiting to go on mine (as soon as I get them refurbed)
i have 16 inch Enkie ( or summat like that on mine ) ...
errr now i need a pic ....
Quote from: Brett;608583I\'ve got some MazdaSpeed MS747\'s waiting to go on mine (as soon as I get them refurbed)
I thought you had decided that they were no-go?
Quote from: grinder;608695i have 16 inch Enkie ( or summat like that on mine ) ...
errr now i need a pic ....
You have a 16"
what?!? :rollin
barracuda velvet
front: 18 x 8,5J offset 25
rear: 18 x 9,5J offset 25
tires:
front: 225/40r18
rear: 255/35r18
(http://94.100.113.224/365550001-365600000/365579601-365579700/365579649_5_ajLC.jpeg)
(http://94.100.113.52/365550001-365600000/365579901-365580000/365579963_5_rVtT.jpeg)
(http://94.100.114.172/365550001-365600000/365580101-365580200/365580188_5_UYr5.jpeg)
found this on an older thread but closed the thread prior to looking at it.
http://www.tirerack.com/upgrade_garage/WheelSearch.jsp?autoMake=Mazda&autoModel=RX-7+Turbo&autoYear=1990&autoModClar
My FC on buddy club P1\'s - 16" x 7.5" et12, not the final ride height yet and more than likely going to reduce the offset a little further, 5 - 10mm spacers going on once she\'s finished going down;)
(http://i133.photobucket.com/albums/q42/willg180/FC3S/FC-090516-pic1.jpg)
(http://i133.photobucket.com/albums/q42/willg180/FC3S/FC-090516-pic2.jpg)
(http://i133.photobucket.com/albums/q42/willg180/FC3S/FC-090516-pic3.jpg)
Antera 309\'s with:
Rears are 20 offset and 10J with 265x30x18"
Fronts are also 20 offset with 8.5J and 225x35x18"
Mine are wider than standard,especially the rears to fill the wider arches. The Antera range are Italian.