Print Page - AFR on Apexi

Title: AFR on Apexi
Post by: jetpilot on May 08, 2009, 05:25:05 PM

Hi guys, i am right in thinking there is a signal wire on an Apexi or wiring loom to wire my gauge in to?

Title: AFR on Apexi
Post by: jackaleks on May 08, 2009, 05:59:18 PM

http://rx7.voodoobox.net/

there\'s an AFR install guide on here. looks like it wires into the stock loom so shuold work with an Apexi

Title: AFR on Apexi
Post by: jetpilot on May 09, 2009, 12:01:59 PM

Thanks buddy, seems my wiring loom is different colours, maybe cause he is in US and left hand drive. Thanks.

Title: AFR on Apexi
Post by: jackaleks on May 09, 2009, 06:25:46 PM

http://www.innovatemotorsports.com/resources/1993_1995_Mazda_RX-7.php

this should help!

i\'ve been meaning to do this myself for a while and i printed this off to help.

Title: AFR on Apexi
Post by: jetpilot on May 10, 2009, 11:23:48 AM

Just tried the suggested wire and it didnt work, but after looking at the diagram and part following advise from the other link and the wire needed is opposite a blue/white wire, 3C is actually at the other end, 2nd in if that makes sense. Maybe is a right/left hand drive thing again. Will go try it now and let you know the results.

Title: AFR on Apexi
Post by: jetpilot on May 11, 2009, 02:19:49 PM

OK, does seem like its the other way round on mine, the wire i used is opposite a blue white and is a black wire, but a 180 flip from that diagram.

Title: AFR on Apexi
Post by: jackaleks on May 11, 2009, 03:21:54 PM

hmm, i guess Mazda must spin everything around when going from RHD to LHD!

i\'ll have to remember that when i finally get around to wiring mine up

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: jetpilot on May 08, 2009, 05:25:05 PM