Hi All,
Got back from Afghan last week and went to start the FC no joy :(
Low compression on the front rotor so have so soaked the chambers in WTF In case of carbon lock on a lazy seal, but if she\'s popped its the end of the road I\'m afraid.
Aftermarket parts fitted-
Microtech LT8s Fuel and Ignition ECU with Laptop adaptor.
HKS Hiper D Coilovers with Pillowball mounts.
Complete custom Fuel setup KG Sec Rail Braided Hoses Aeromotive FPR and AN Fittings.
Autometer Gauges x3 Fitted under Stereo , Boost, Oil Press, Oil Temp.
Front Splitter still in box (Bought off Prof sometime ago).
HKS Old style BOV.
Dual Pulley Alt.
Blanking plates (All Emissions removed from the FC.)
Racing Beat Stainless Steel T2 Exhaust system.
Black Magic Flex a Lite 150 Fan with relays.
And everything else as per standard.
Hopefully she will fire up over the weekend but if not..............:(
Paul
Sorry to hear this. Sad to see yet another FC broken :(
On the plus side there are plenty of scavengers on here that\'ll gladly take parts off your hands (me being one of them!). What colour is the car? I\'m after a passenger side front wing (maybe a bumper too) in red. Oh and maybe the splitter also.
Quote from: TiddlesRX7;597825Sorry to hear this. Sad to see yet another FC broken :(
On the plus side there are plenty of scavengers on here that\'ll gladly take parts off your hands (me being one of them!). What colour is the car? I\'m after a passenger side front wing (maybe a bumper too) in red. Oh and maybe the splitter also.
Hi Mate,
She\'s in the usual Gun metal grey I\'ll post some prices up if I get interest on some of the parts otherwise it may have to go on Ebay :rolleyes:
Paul
QuoteComplete custom Fuel setup KG Sec Rail Braided Hoses Aeromotive FPR and AN Fittings
Could be interested in this Paul.
crap.. exactly what I was curious about after suffering fuel surge while drifting. 2nd Dibs etc!
Some pics from an earlier thread.
http://www.mazdarotaryclub.com/forums/showthread.php?t=51342
Paul
sooooooooooooo many toys :D
hey how much for the coilies?? and rear lights??
also wiper switch would be ace.
If I do break her up :(
I would be asking for £450 for the coilovers cost me just short of a grand 18 months ago.
Wiper switch £70 ovno these are well over a £100 at a dealer.
Paul
How much for the fuel stuff please matey.
Quote from: G@NDY;597965How much for the fuel stuff please matey.
I would be looking for £250 ovno for that you will get-
Aermotive A 1000 FPR with Gauge Perfect Condition.
KG Parts Secondary Rail With Inhecjor Adaptors and AN 6 Fittings.
Customised Primary Rail with Blue AN 6 Fittings.
SS Braided Hoses throughout.
Anonised Y Splitter block AN 6.
System made to the following design on fc3spro.com
http://fc3spro.com/TECH/MODS/FUEL/pararail.jpg
Paul
Sorry to see the car in peril,not what you wanted to see after your tour. try and get her going,a good tow start might free her up,be a shame to break her if it is just stuck seals.
gonna ask out of interest - how much is the ECU etc..
but it would be a shame to break her :(
Quote from: grinder;598131gonna ask out of interest - how much is the ECU etc..
but it would be a shame to break her :(
I would let the Microtech go for £550 ono :mmmm
Paul
okay could i call shot gun on the coilies?? ive heard conflicting opinions on the hyper d\'s? What sort of ride do they give and whats the ajustment like?? cheers
Quote from: Adam fc;598138okay could i call shot gun on the coilies?? ive heard conflicting opinions on the hyper d\'s? What sort of ride do they give and whats the ajustment like?? cheers
Obviously there fully adjustable as you would expect. There is a knob :eek: on the bottom of the front coilovers to adjust the ride from hard to soft.
Like all brands of coilovers if you are after smoothness stick with the stock suspension.
These coilovers are excellent for Strip / Drift etc
Paul
It would make a nice project for someone to buy complete. But lets hope it doesn\'t get to that stage though. Fingers crossed you\'ll fix the motor.
Yep, shame to see an FC broken with so much effort put into it. Looks really clean too :(
But if you have to, i\'m interested in the dual alt pulley and blanking plates.
Update:
Tried to get her going this morning no joy again.
It sounded slightly better compression wise but not the usual thump,thump,thump..
Its either a Stuck seal or worn out Apex seals springs or combo of both or the dreaded Apex seals have gone.
No signs of damage to plugs though ?
Will try a start on Monday will have to get one of the works Landrovers to tow me round :Giggle
If I do break her up I would be satisfied that all the parts go to good home on here.
Paul
ah man, thats a shame if you cant get it fixed, maybe sell it as a whole to someone who can fix it? Really would hate to see another FC broken, there aren\'t enough of them as it is, especially one that looks on such good condition! good luck man
Had a freind of mine look her over ( John Goodwin 88Gtr ) lives down the road :wiggle
Low compression on the front rotor after he put his iriduim plugs in will wait until the tow start to make a decision.
Paul
excellent,my 20 year old stock shocks are going abit week at the knees,hope it works out for you.
hi mate how much for the bov n would it fit my fd?
i would have the fan mate,bit more info on the exhaust,how much,
Quote from: JamietypeR;598409hi mate how much for the bov n would it fit my fd?
I\'m sure you could make it fit however it\'s mounted on a pipe espically for the FC3S.
Paul
Quote from: flatout;599045i would have the fan mate,bit more info on the exhaust,how much,
Hi,
Not sure if going to break her I will have a decision soon.
However the Fan is sat in my cellar and is available for £120 minus postage
these are seroius fans and not some ebay rubbish but look at this ebay link for the fan
http://cgi.ebay.com/ebaymotors/Flex-a-Lite-Black-Magic-150-Electric-Fan_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQhashZitem200145368929QQitemZ200145368929QQptZRaceQ5fCarQ5fParts
If interested we can finalise the sale.
Paul
Update,
All parts available less Boost Controller which I\'m going to keep for myself.
Many thanks
Paul
out of interest - is the exhaust fully decatted turbo back ??
and what size piping is it ?
also a price
and how much for the 3 gauges and i assume oil filter ped
ta
stu
me again :D :D would you sell the front number plate holder ( and if so what are the 2 metal things underneath it )
Quote from: grinder;603298out of interest - is the exhaust fully decatted turbo back ??
and what size piping is it ?
also a price
and how much for the 3 gauges and i assume oil filter ped
ta
stu
me again :D :D would you sell the front number plate holder ( and if so what are the 2 metal things underneath it )
Hi Stu,
I want be able to move the large items just yet.
The gauges are Autometer Ulta lite\'s Oil Temp, Oil Press , Boost in a angled Din Surround I will throw in the Oil Filter Pedestal.
The Gauges retail at just over £50 each you can all of the above for £120.
I\'ll check out the number plate holder and post pic\'c
Paul
the gauges are too many pennies for me
so just info about the number plate and exhaust please :D
Sorry to hear its being broken, but I will take the dual alt pulley and blanking plates
let me know what you\'re after for them.
anyone taken the fuel set, ecu or fan yet?
can i call dibs on them for now?
Quote from: mukumu kurubushi;603404Sorry to hear its being broken, but I will take the dual alt pulley and blanking plates
let me know what you\'re after for them.
How do\'s £30 sound incl postage.
Paul
Quote from: dthebuk;603423anyone taken the fuel set, ecu or fan yet?
No one has dibs on the Microtech or Fuel Set, however I put the fan in the For Sale section and didnt generate any interest so it\'s on ebay !!
http://cgi.ebay.co.uk/Flex-a-Lite-Black-Magic-150-Electric-Cooling-Fan_W0QQitemZ270381488444QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item270381488444&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318
Fuel Set £250 ovno
Microtech £550 ovno
I will throw in with the Microtech a "Microtech training Manual" that I bought direct from Australia Its the one they hand out at there seminars.
Paul
Paul
ok i shall converse with my mate (who half owns the car).
Any idea on what power the fuel set up is good for?
Quote from: paul3944;603429How do\'s £30 sound incl postage.
Paul
Sounds good to me. How would you like to be paid?
also what lip is it your selling. Just a standard TII one?
Quote from: mukumu kurubushi;603438Sounds good to me. How would you like to be paid?
Paypal or Bank Transfer but sadly Paypal payment would have to cover the
fees.
Paypal Calculator here - http://www.rolbe.com/ppcalc.htm
Paypal address - scousewhelan@hotmail.com
Quote from: dthebuk;603439also what lip is it your selling. Just a standard TII one?
Its a Shine Auto Project Lip have a look on there web site its also on RX7Club.com
Paul
Can i second the coilovers??
ooo lip please. Is it mede out of that bendy stuff yea?
Quote from: paul3944;603441Paypal or Bank Transfer but sadly Paypal payment would have to cover the
fees.
Paypal Calculator here - http://www.rolbe.com/ppcalc.htm
Paypal address - scousewhelan@hotmail.com (scousewhelan@hotmail.com)
Payment sent, cheers.
Quote from: dthebuk;603453ooo lip please. Is it mede out of that bendy stuff yea?
Yes its one of the bendy ones !
Quote from: mukumu kurubushi;603460Payment sent, cheers.
Thanks for the Payment will take them off tommorrow and send out I will throw in the belt as well as they are impossible to find.
Paul
Ok. Think we\'ll take the lip and the fuel stuff if I can have a bit more info on it etc. Also where about are you situated? Oh and how much is the lip? Cheers
Quote from: James H;603446Can i second the coilovers??
Second Dibs is yours Sir !!
I\'ll work out roughly how much postage would be.
Paul
Quote from: dthebuk;603483Ok. Think we\'ll take the lip and the fuel stuff if I can have a bit more info on it etc. Also where about are you situated? Oh and how much is the lip? Cheers
How do\'s £100 ono sound for the lip these are rarer than rocking horse sh*t cost a fortune from the states with shipping and customs.
The fuel setup was built to a design on FC3Spro.com with parts supplied by myself from the states and Shy Auto.
KG Parts Secondary Rail With AN Adaptors and Injector Grommets
Modified Primary Rail to Accept AN Adaptors.
Aeromotive A1000 FPR with Gauge in PSI.
Swivel Red and Blue AN Adaptors on All Joins.
SS Braided Hoses All Round and from the Fuel lines that run up from Bulkhead and Filter.
From my research this is no FC engine unless your a Millionaire !! that will outgrow this setup its the Injectors and Pump that will let the side down.
Hope this helps
Paul
nice one mate. Drop us an email at James_db@btconnect.com and we can sort out postage (or collection) and payment etc.
Dual Alt pulley and Blanking plates SOLD
Fuel Rail Kit Prov SOLD to DtheBuk
Front Lip Prov SOLD to Dthe Buk
Microtech Lt8s AVAIL
Coilovers Prov SOLD
Autometer Gauges AVAIL
Magnecor Leads AVAIL
HKS BOV AVAIL
New OEM Wiper Switch AVAIL
Exhaust Let me check the postage on this before I remove it thanks
And all the usual trim, engine and misc parts.
I will look in my garage to see if theres any goodies I missed !
Paul
reply sent :D
Quote from: TiddlesRX7;597825Sorry to hear this. Sad to see yet another FC broken :(
On the plus side there are plenty of scavengers on here that\'ll gladly take parts off your hands (me being one of them!). What colour is the car? I\'m after a passenger side front wing (maybe a bumper too) in red. Oh and maybe the splitter also.
Hi Adrian,
Ive got a front bumper and possibly n/s wing in red :Giggle Gimme a bell ;)
your not breaking the rew are you ?!?!
ohhhh didnt see these in your original post : Magnecor Leads
how much posted ?
How much you wanting for the bov mate?
Quote from: grinder;603595ohhhh didnt see these in your original post : Magnecor Leads
how much posted ?
How do\'s £20 sound posted.
Quote from: NeilSR;603607How much you wanting for the bov mate?
How about £55 posted ovno.
Sorry,
Just to add all Paypal payments must use the calc listed earlier in the thread to cover the rip off fees.
Paul
i have no idea what you mean about the calc .. would you accept a bank transfer - then there are no costs involved ??
if the leads are in good nick ( they look like the 8.5mm blue ones ) - then yeah £20 is fine and dandy
there is 4 of them isnt there - i cant tell as it looks like some have been wrapped up ???
i need to read up about this calc - but the works internet is that slow - its taken me 20 mins to get this reply up :(
or you can do a paypal gift - which would help you loads - it puts all the costs on the person sending the cash - i sent someone £4 a few days back - but it cost ME - £4.34 - as i paid the fees - much easier than the calc thingy :D
money sent
Quote from: dthebuk;603713money sent
Took the rails off the car this afternoon will post tommorrow
Thank you
Quote from: paul3944;603611How do\'s £20 sound posted.
With Paypal fees it would be a whopping £20.91 !!
Paul
Quote from: mukumu kurubushi;603460Payment sent, cheers.
Removed from FC today.
I\'ve included Alt Belt and Smaller Pulley Belt to go with the dual pulley also
2x Blanking plates. Will post tommorrow
All other parts are still available.
Paul
ha ha ha !! - will paypal you the money in an hr or so :D
i will send addy details with the payment
ta
stu
woohoooo saved myself 3pence :
QuoteYour Fee £0.88 GBP
Your total charge £20.88 GBP
Your recipient will receive £20.00 GBP
payment made :D :D :D
Quote from: grinder;603777woohoooo saved myself 3pence :
payment made :D :D :D
All bagged up ready to go in the morning.
Many thanks
Paul
Quote from: James H;603446Can i second the coilovers??
Hi James,
No one has got back to me about the Coilovers.
I\'m after £450 which is a bargain as they cost me just short of a Grand !!
I\'ve had a rough estimate on postage and it\'s in the region of £60-£70 !!
I will do the coilovers therefore with postage for £500.
Let me know your thoughts
All the best
Paul
Bargain! Is it christmas?
J
Quote from: paul3944;603788Hi James,
No one has got back to me about the Coilovers.
I\'m after £450 which is a bargain as they cost me just short of a Grand !!
I\'ve had a rough estimate on postage and it\'s in the region of £60-£70 !!
I will do the coilovers therefore with postage for £500.
Let me know your thoughts
All the best
Paul
If it\'s snowing where you are Jurg it most certainly is !!
All parts posted yesterday.
The Microtech is still up for grabs surprised it didnt go first !!
Paul
i will let you know when the leads arrive
any news on the exhaust yet ??
Quote from: grinder;604286i will let you know when the leads arrive
any news on the exhaust yet ??
Hi Stu,
I\'m not sure what I would take for the Exhaust I guess you will have to make
an offer.
Postage would not come cheap on this afraid I would have to break it down into possibly 4-5 Parcels !!
If you are deffo interested I could bring it to my Mothers house at the end of the Month (Liverpool)
Paul
is it a full turbo back system , fully decatted and all stainless ??
i am interested in it - but it depends on price
ideally i just want a centre decat , but depending on the price of a full system - i could be interested ;)
i have been offered a full system already - but the bloke is going thru a bad patch so it will have to wait - hence me on the look out for another
give me a ball park figure and i will give you a yes or no answer
dont forget , im known as being cheap so bear this in mind
and i could collect from liverpool to save on postage ;)
Hi,
Yes it\'s fully decatted As I was running with no Air pump or Emissions.
Here is a link to the Exhaust
http://www.racingbeat.com/FRmazda2.htm
The one I have Is REV 1 but is identical to the one in the picture.
Its not shiny all over like the one in picture due to it being on the car but there is no rust or corrosion.
If you can collect I will take £280 ono for the exhaust which I think is a fair price for a decent exhaust which will probably last longer than the car !!
Paul
hiya matey - nearly double what i have been offered one for - so the simple answer is No :(
at least there is now a price for the other interested parties to look at :D :D
got my bits today, thanks :Thumbs-up
Thought id mention that i also have my lip :D
leads arrived ... :D :D :D
just need to fit them rather them sitting in the garage for 12 months
Fuel stuff has arrived i believe, havn\'t checked it yet
Funds sent Paul,let me know if they got through. I will arrange a courier towards the end of the month.
Quote from: pdtaylor18;606546Funds sent Paul,let me know if they got through. I will arrange a courier towards the end of the month.
Thanks Pete,
Coilovers now sold.
Lots of other parts still available.
Many thanks
Paul
Which parts are still for sale?
Quote from: m1tch;606565Which parts are still for sale?
Still got the Autometer Gauges / Black magic Electric fan and the Microtech which is up on ebay.
Still got all the interior trim and misc fiddily parts
Paul
Paul if the engine is blown how much do you want for the throttle bodies(as long as they have not beem messed about with).
Quote from: pdtaylor18;606628Paul if the engine is blown how much do you want for the throttle bodies(as long as they have not beem messed about with).
Sorry Mate,
The Throttle body was one of the first items to from by Ebay breaking sale.
Paul
I need a fuel filler flap if you have one?
Hi Mate,
The whole cars been prov sold or whats left :(
Paul
Quote from: paul3944;606618Still got the Autometer Gauges / Black magic Electric fan and the Microtech which is up on ebay.
Still got all the interior trim and misc fiddily parts
Paul
What is the bidding address?