Print Page - Wire Harness unsure of two wires

Title: Wire Harness unsure of two wires
Post by: BleakBoy on March 27, 2009, 08:06:06 AM

Hi, I have been rewiring my Wire Harness and removing all the crap from twin setup.

I am stuck on 2 wires.

No 1. This one goes from the top of the Coolant Filler Neck but where to?

(http://i160.photobucket.com/albums/t181/Bleakboy/IMG00024.jpg)

No 2. This wire i am sure goes to the coolant sensor on the block above the Oil Pressure Sensor.

(http://i160.photobucket.com/albums/t181/Bleakboy/IMG00025.jpg)

Thanks for any help

Title: Wire Harness unsure of two wires
Post by: Jim_rx7 on March 27, 2009, 11:59:13 PM

It\'s hard to tell from the pics mate.

The one in the second pic. Does that come off the main harness or the starter side of the harness?

Also, what plug am I looking at in the first pic?

Title: Wire Harness unsure of two wires
Post by: BleakBoy on March 28, 2009, 12:02:38 PM

Second Picture, comes of the main Wireharness, pretty sure this now connects to the Block just below the Oil Filter.

First Picture, this connects to the top of the filler neck, and think now it connects onto the Starter / Alternater harness.

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: BleakBoy on March 27, 2009, 08:06:06 AM