Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: davyv on February 17, 2009, 08:42:52 PM

Title: Clutch
Post by: davyv on February 17, 2009, 08:42:52 PM
Hi all. I am after an uprated clutch for about 400atw. I really want one like the stock clutch nice and light as the cars only for weekend driving and no track ect. Where from and how much, thanks.
Title: Clutch
Post by: Mazdarotaryparts on February 18, 2009, 09:16:12 AM
If you would like to follow the link below this should be by far your cheapest option for buying a prooven good quality clutch.
 
If you were track daying/ Racing or Drag racing we would recommend a different clutch but with many road FD\'s out there with this clutch fitted this should be  that fits exactly what your looking for,


http://www.mazdarotaryparts.com/bfd-ct002-mrp-developed-exedy-stage-two-clutchb-730-p.asp

Hope this helps
Title: Clutch
Post by: davyv on February 21, 2009, 09:15:56 PM
What about the FD-CT006 CENTRE FORCE DUEL FRICTION CLUTCH on your site Clive. What power is that good for.
Title: Clutch
Post by: Mazdarotaryparts on February 22, 2009, 09:51:39 AM
We have sold a few of these over the years with no complaints and know of a 600 bhp that ran one of these but the car was never dragged or tracked and driven gently!

If your really interested we would have to re-check the price of this item as it\'s American and as you will see on out site, we can\'t guarantee prices at the moment.

But even without any price increase it would be £173 more than the clutch we suggested which will be fine providing you are going to drive the car only on the road,

If you want real belt and braces I would suggest you look at the Hyper Single on this link,

http://www.mazdarotaryparts.com/b-fd-ct003-exedy-hyper-single-clutch---complete-kitb-1295-p.asp


Hope this helps,
Title: Clutch
Post by: shaunwil on February 22, 2009, 01:48:43 PM
I\'m running with a hyper single and I\'m not really a fan of it. Been wondering what you would recommend for up to 450atw with as close as stock feel as possible ?

Shaun
Title: Clutch
Post by: Mazdarotaryparts on February 23, 2009, 06:59:15 PM
Quote from: shaunwil;586463I\'m running with a hyper single and I\'m not really a fan of it. Been wondering what you would recommend for up to 450atw with as close as stock feel as possible ?

Shaun

The Centreforce will cope with this power and give you a stock type pull away unlike a paddle clutch, plus you can use the stock flywheel that gives you the extra inertia to pull away nicely and not like an F1 car leaving the pits,


More details can be found on this link  below,

http://www.mazdarotaryparts.com/bfd-ct006-centre-force-duel-friction-clutchb-733-p.asp


Please allow around 2 weeks for delivery as we would have to get this in from America,

Hope this helps