ok my rad fan doesnt seem to come on? what is the temp it should be on?? if i press the a/c button it comes on but any other time it doesnt seem to?? when sat in traffic i push the ac button to keep it at 80-85 degrees and it never goes above that while running but a bit confussed why it doesnt come on any other time?? what temp should it come on? i think i read somewhere there was a test to see if it works?
its for an fd btw :) :Party:driving
87 is the ideal operating temp mate.
well i left it to 90 and it didnt come on lol...
hey mate,
faulty temp sensor wire maybe?
just hope *touch wood* u dont have the same prob as me!! :)
oh its not overheating or getting pressurized, not using ANY water, i was just wondering when it should come on :) and if there is a way to test it :)
was gutted to hear u had probs bbcfc! if i can do anything to help gimme a pm on here, cant do much but can take things appart and give u a hand if u need it :D
As said above it\'ll either be the temp sensor in the water housing or one of the fan relays which are the rubber covered bits sitting in the metal frame just infront of the drivers suspension turret.
The fans are operated from the Thermoswitch on the back of the stat housing, the one with a single wire, my fans did not work either, as the thermoswitch works by basically grounding its wire to earth, i shorted the single wire to earth at the housing end, but still no fans came on as there was no continuity on this wire to relay number 3. the wiring had broken down somewhere, so i rewired it, and it worked fine, it is this wire that can also be connected into a switch in the cabin to overide the thermoswitch and turn the fans on, without the AC, i have not done that yet as i replaced the thermoswitch for a lower temp one= 96c instead of 106c as standard, i also fitted a Water temp guage, at the same time, (good mod!) i cant remember wire colours etc, for more info search ro284\'s - FD Temp guage and Thermoswitch mod. i would start with continuity check on the wire
Good luck Bob
Quote from: MaLicE;578420oh its not overheating or getting pressurized, not using ANY water, i was just wondering when it should come on :) and if there is a way to test it :)
was gutted to hear u had probs bbcfc! if i can do anything to help gimme a pm on here, cant do much but can take things appart and give u a hand if u need it :D
thanks. taking things apart is the easy bit.. putting them back together without nuts n bolts left over is the hard part lol