Hey,
just wondering how easy it is to cut a CF hood to fit aero bonnet pins..?
any advice would be good..
cheers =)
easy as pie just follow the simple instructions and take your time measure everything twice
ai.. dunt knock the difficulty in baking pies..
just thought cf would be harder to cut etc.
cheers =)
It blunts drill bits like they are going out of fashion...but apart from that piece of cake!
Oh and measure at least 3 times!
hmm.. ok.. maybe i\'ll look for a cf hood with either stock subframe or pre-inserted pins
cheers =)
dead easy just scary! lol
use a dremel to get it spot on and put down loadsa maskin tape to stop it fraying:mmmm
heres a pic of mine that i used a dremel on and drilled the holes with cobalt drills at very slow speed, oh and i glued all the edges i cut and drilled to stop any moisture gettin in the weave
(http://i9.photobucket.com/albums/a52/leeincivic/rx7%20pics/DSC01658.jpg)
oh cool.. cheers =)
i got a dremel somewhere...
looks like the hood im gettin has stock latch.. =)
so hopefully i wont need to cut up £££ worth of material =D
good idea with the glue!