Just got my car back from major works, and the Defi gauges now have a bit of a problem.
When they go through their "boot-up" mode the backlights go on as usual, and everything seems fine. When they then get back to their idle state, the backlights switch off.
If I put my lights on, they will light up. So my only option at the moment is to drive round in the day with my sidelights on if I want to see Oil, boost, etc.
Any suggestions ?
Cheers, Craig
check the wiring.
I have older (non BF) Defi gauges which only light when lights are on as per your situation. - but I can read when not lit.
Perhaps the wiring has been done as for mine instead of for BF which must be lit if engine running.
http://www.defi-shop.com/product/images/dlink-manual06064e.pdf
Possibly page 50 :D
Shaun
The back light is only meant to come on with the lights and during the start up sequence.
dude simple to fix
the defi s gauges should be daisy chained they have the out put to the first gauge coming from the wrong port on the controller swop it for sender 2 to sender 1 or vice a versa
Cool, will have a play and see what happens. Thanks for all the suggestions.
any help let me know mate ill put pics up but thats definatly what it is
Out of interest I noticed in that manual the Defi Link Controller needs to have a series of switches set to accomodate how many cylinders the car has. What are you supposed to set it at if your engine hasn\'t got any? ;)
OK, swapped the gauge sender wire over and one gauge lit, the other didn\'t !! Removed and replugged the d/c power wire and then both reset and lit. Thanks for the pointer.
BTW, the dip switches for cylinders are only used for a tachometer. You set to 4 cylinders for a twin rotor, or 6 cylinders for a triple rotor.