Print Page - Diagnosis Connector Pin Out

Title: Diagnosis Connector Pin Out
Post by: JiM B on November 04, 2008, 07:56:26 AM

Hi,

Does anyone have a pin out for the diagnosis connector? I\'ve created the attached from the info i can find.

Ideally i\'m after the pins so that i can get an error code.

Thanks,
James

Title: Diagnosis Connector Pin Out
Post by: leon on November 04, 2008, 09:55:08 AM

LED between FEN and B+ then bridge TEN and GND i do belive :Thumbs-up

http://www.mazdarotaryclub.com/forums/showthread.php?t=23569 that link has more information and links to what the error codes mean

Title: Diagnosis Connector Pin Out
Post by: JiM B on November 04, 2008, 07:21:51 PM

Thanks Leon,

So is that attached diagram correct to how i should actually connect the wires / LED?

Would prefer not burning out the wiring loom....!

Title: Diagnosis Connector Pin Out
Post by: adib on November 04, 2008, 07:33:56 PM

hi jim if you do this can you let me know if it works the way your drawing is as will be doing this weekend thanks

Title: Diagnosis Connector Pin Out
Post by: JiM B on November 05, 2008, 07:17:49 AM

Yep just tried connecting the wire and diode as indicated in the diagram above, worked a treat.

Got an error code of 45 which is \'Charge control valve open or short circuit\'.

So all i need to do now is work out what than means....:Hammer

Title: Diagnosis Connector Pin Out
Post by: adib on November 05, 2008, 06:47:44 PM

thanks for that jim, is it the charge control soleniod if it is then its the second solenoid in, in the rats nest or if its the charge control think thats the one on the y pipe

Title: Diagnosis Connector Pin Out
Post by: JiM B on November 07, 2008, 05:58:25 AM

Any Ideas is the charge control solenoid is contained within the black box rats nest that i have in my car like the one is the following thread:

http://mazdarotaryclub.com/forums/showthread.php?t=53326

Cheers,
James.

Mazda Rotary Club

General => General Technical => Topic started by: JiM B on November 04, 2008, 07:56:26 AM