hi guys cam across this rx7 on ebay
wot intrest me is that they are claimin 342bhp @0.7bar boost!!!
can this b true as i made 316bhp @0.85bar boost!!!
just curiuse
Maybe on a ported engine.
With ports maybe.
I made just over 340 on (as far as i know) and unporrted block with .92 bar on 99 spec twins.
is the claim at the fly or the wheels? mine made 358.7 atf on 0.8bar on 99 spec twins!
That\'s good, mine only makes 320 at .9 bar on stock twins, 1993 though.
320bhp at 0.9bar for me on standard twins.
mines non sequential with a street port and filters etc with 369fwhp at .8bar mine 1992 with twins from that year
Quote from: Morrmat;544826is the claim at the fly or the wheels? mine made 358.7 atf on 0.8bar on 99 spec twins!
stock engine, filters, pfc, intercool... seems to be a good variety in peoples power
its not a silver rex with a feed carbon bonnet is it lol?
Quote from: Morrmat;544826is the claim at the fly or the wheels? mine made 358.7 atf on 0.8bar on 99 spec twins!
Hmm, interesting - is that with a port? and who was it mapped and dyno\'d by?
307.2fwhp on stock twins at 0.8bar
322 stock motor and tubbies, 95 fuel uprated smic 0.85bar.
Big difference on who maps, how agressive and how accurate the readings are tbh.
When I bought mine it was making 292whp (according to the dyno sheet) which is roughly 350 (assuming 18% power lost through the transmission). Mine is a street-ported engine with ARC smic, filters, full exhaust (inc. downpipe and decat) and running 0.85bar on stock twins.
It\'s now running at 1bar, but I have no figures for that.
As said there are big differences depending on who mapped the car, what dyno was used, not to mention how many different setups we all run.
306 fwhp @ 0.8bar with just a decat+backbox safe map by pip.
Quote from: SiH;544957Hmm, interesting - is that with a port? and who was it mapped and dyno\'d by?
As far as i\'m away its got stock porting, when i brought the car it had a 2nd hand rebuilt engine placed in it that had done 4000 miles. I presume theres no way of telling what porting its had done other than on the reciept, which doesnt state any porting!
Was mapped by Max @ ReWorx just over a month ago - he suggested i leave it at 0.8 and was very pleased with the way its running.
i was running 350 atf on twins with no porting :)
395 fwhp on ported engine - all done by Pip.
Quote from: cyman;544906mines non sequential with a street port and filters etc with 369fwhp at .8bar mine 1992 with twins from that year
Mines non sequential, ported filter etc @ 0.8 bar. not had it tested with every thing done tho. :2Rolleyes curious to see what mines pushing out.
Quote from: Steve-Q;545570Mines non sequential, ported filter etc @ 0.8 bar. not had it tested with every thing done tho. :2Rolleyes curious to see what mines pushing out.
you should be getting at least the same as mine. i havent pushed mine for outright power my exhaust is still quite quiet with a silenced de cat at around 96db. so its got enough power but is very nice and relaxing on a run :Thumbs-up
mine was 300 atw with stock ports and twins @ 0.9 bar so could be true