Text only | Text with Images

Mazda Rotary Club

General => General Technical => Topic started by: pearl_rex on September 22, 2008, 09:04:36 AM

Title: noob question about bleeding the coolant system
Post by: pearl_rex on September 22, 2008, 09:04:36 AM
as the title says this is a really noobish question but can someone tell me exactly how to bleed the system? i know you have to take the throttle body hose off but whats the procedure?  
 
 
thanks:wiggle
Title: noob question about bleeding the coolant system
Post by: SmbFD3S on September 22, 2008, 09:44:10 AM
Easiest way mate is to take the throttle body hose off like you say, and fill the system slowly.  I did this by cutting up a coke bottle, putting the lid on and drilling a 4mm hole in it so it just trickles out slowly, then just wait for the coolant to come out the TB hose, reconnect it, run the car for 10 mins, switch off and check :D:D
 
Never had a problem with mine doing this :D
Title: noob question about bleeding the coolant system
Post by: pearl_rex on September 22, 2008, 09:45:48 AM
thats great thanks alot mate :)
Title: noob question about bleeding the coolant system
Post by: SmbFD3S on September 22, 2008, 09:48:49 AM
No worries mate :D
Text only | Text with Images