I\'m having the car mapped using an apexi power fc, have a greddy FMIC with hard piping, greddy compression tube, kakimoto exhaust & filters for the turbo\'s.
Do I need anything else to get the most out of what I have already ie injectors, fuel pump etc ???
Depends on what level of tune you want. Injectors would want to be bigger past 0.85bar on stock twins. Although the list of other mods is long !
Get it mapped up to 0.8bar and see what you want after that. The initial tune is usually most expensive and then any changes may only be an hour on the dyno after that.
Shaun
Thing is Shaun there is 9 of us flying a tuner in from the uk to Ireland to map the cars so i\'d like to have everything in the car waiting for him to map...
What type of injectors would i need size wise ? I can get Sard ones within 3 days...
Go for the 1600/1680 secondaries with a FPR and uprated fuel pump. Its a squeeze to fit them with the stock rats nest but I think it has been done. Also get some of the racing plugs, do a search for the NGK ones. Usually over about 0.9bar there is spark break up and can make tuning very hard.
Who are you flying across ? May be worthwhile talking to them about what they think you need in advance of the trip.
Shaun
If you are looking to push the stock twins, then a downpipe, decat, fuel pump (or rewiring the original if you want a cheaper solution) will allow a bit more power. After that then it\'s fuel pump and bigger injectors time :)