Hi guys,
I\'ve taken a the Baileys DV26 dump valve off of my old car with the intention of fitting it to my FD. However, the HKS one i\'ve taken off has a much smaller fitting to it and as such the DV26 won\'t fit in the tube. Is this a sign that it\'s not meant to be fitted to an FD or is it simply a case of getting a larger tube and making it fit??
BUMP BUMP!
Any advice on this one please? :)
I have a Bailey Motorsport Valve which i am intending to put on today if i can get the bloody hoses off....
The Bailey one will fit but you will need to buy a fitting kit which consists of a blanking plug which goes on the hose to your airbox (if you have one) and a reducer pipe, the smaller end going to the car and the larger end going to a piece of tubing that comes with the kit that the valve then fits onto...
All are fastened with supplied jubilee clips....
Or you could just get a larger tube but if you have an airbox as opposed to an induction kit then you will need the blanking plug, whole kit is about 30 quid...
The parrt number for the fitting kit is FK51