I used to use Tein bonnet lifters, but they\'re too powerful for a fibraglass bonnet which is what I have. Does anyone know of any \'weaker\' bonnet lifters that a fibreglass bonnet will be able to close?
I too would be interested in any replies on this subject as I was about to buy a pair of Tien !!
Thanks for the warning.
Chris
Have a look through here:
http://uk.rs-online.com/web/search/searchBrowseAction.html?method=retrieveTfg&binCount=60&Ne=4294957561&Ntt=gas+struts&Ntk=I18NAll&Nr=AND%28avl%3auk%2csearchDiscon_uk%3aN%29&Ntx=mode%2bmatchallpartial&N=4294955592&Nty=1
RS Components have a range of gas struts and most of them have a valve on them where you can release pressure. So once fitted you can release enough pressure until it suits your application IYSWIM.
Just need to measure up the Tein ones and find something similar!
nice one, cheers :) I\'ll look into it.
Let me know also Nik as I have the same bonnet and have to carry the bonnet lifter in the car (it doesnt fit with my smic!!).
I haven`t seen the tein ones but is there any way of letting a bit of the gas out? Some of the gas cylinders I have seen on CNC machines have a small grub screw in one end to relieve a little pressure to suit. (be very carefull not to let to much out though!)
Quote from: gary dickens;523728I haven`t seen the tein ones but is there any way of letting a bit of the gas out? Some of the gas cylinders I have seen on CNC machines have a small grub screw in one end to relieve a little pressure to suit. (be very carefull not to let to much out though!)
In my trawl of the \'net I have also seen this. I will take the end off when i get home and have a look. Trouble is: I\'ve lost the metal pegs with the ball on that bolts into the wing! :( So even if they can be adjusted, they are useless!!
I know a chap who makes them for various cars. I can ask him again if anyone is interested cause I would like a set. Think he wanted £45 and he tailors the pressure for your application (I would need the lenghts and what ever else it is you need to know to make them). Sure he will do a lil discount if we have a few. :)
well, as you see, i would be interested :)
Sounds like a group buy in the making to me :)
Yup - defo interested in a set for the FD ;)
I\'d be interested in a group buy for these.
Chris
after seeing how much my bonnet was blowing in the wind at Pod on it\'s stock stand, I might be interested in this too....
No FC\'s allowed. Get out! :D
(Only kidding!)
Ok then I can ask the chap if he would do a price for the FD and also the FC. I shall also ask him if he will discount if we get a few of us together. I will need the dimensions or whatever it is though.
I\'ll contact him and see what he needs :)
Remember, the important as pect for me would be that a fibre glass bonnet can shut them. The TEIN ones are too strong.
heres all the stuff i make in brisbane
http://www.ausrotary.com/viewtopic.php?f=48&t=151267
http://ausrotary.com/viewtopic.php?f=20&t=151264&p=1895411#p1895411
http://www.ausrotary.com/viewtopic.php?f=48&t=155865
http://www.ausrotary.com/viewtopic.php?f=20&t=155930
http://ausrotary.com/viewtopic.php?f=48&t=156983
http://ausrotary.com/viewtopic.php?f=20&t=150762&p=1882667#p1882667
Hi,
are they all custom made, or do you do a set for the FD with stock bonnet?
dont make em for fd\'s
(http://i26.tinypic.com/2zxmsdi.jpg)
(http://i26.tinypic.com/2ps57yw.jpg)
(http://i27.tinypic.com/rjehw4.jpg)
(http://i38.tinypic.com/2uhbmtw.jpg)(http://i33.tinypic.com/2yyb24o.jpg)
(http://i34.tinypic.com/2ql8ppi.jpg)(http://i36.tinypic.com/2jdf28k.jpg)