Print Page - would this be man enough

Title: would this be man enough
Post by: batman on July 28, 2008, 11:32:29 PM

http://cgi.ebay.co.uk/EXEDY-Stage-2-Racing-Clutch-Mazda-RX-7-RX7-FC3S-FD3S_W0QQitemZ120285456883QQcmdZViewItem?hash=item120285456883&_trksid=p3286.m14.l1318

what do you recon guys:Thumbs-up

Title: would this be man enough
Post by: philiwily on July 29, 2008, 04:35:43 AM

Good price, but thats a push type bearing and cover. FD is pull type, there is a mod to fit these i think.Dont know pros an cons

Title: would this be man enough
Post by: SiH on July 29, 2008, 08:07:56 AM

I\'d avoid all \'Exedy\' Clutches off eBay - there are a lot of fakes floating around and lower spec ones being sold as higher spec ones. Go with a known dealer if you want to err on the side of caution.

Title: would this be man enough
Post by: Nitronige on July 29, 2008, 08:28:26 AM

my bro bought one not that long ago!! don\'t know if its fake or not (it is stamped Exedy, if that means anything), but it can handle the power out of a single turbo\'d engine. quite on/off he decribes it.

Title: would this be man enough
Post by: batman on July 29, 2008, 09:00:20 AM

well i dont really want to spend 800 on a clutch and the only place that i found that deals in a c t clutched is rx store,net iand from previous experience i dont want to use them

Title: would this be man enough
Post by: jammy_uv on July 29, 2008, 11:08:25 AM

don\'t buy that item from ZenaRacing they are a copy manufturer linked with Autobahn88 - look for Gripforce on ebay.com they sell ACT clutch kits for a good price.

Title: would this be man enough
Post by: SiH on July 29, 2008, 12:32:25 PM

I\'d look at RPS as well - shouldn\'t break the bank - you can get them from SRBPower.

Title: would this be man enough
Post by: batman on July 29, 2008, 01:46:16 PM

thanks guys

Title: would this be man enough
Post by: Jono FD3 on July 31, 2008, 09:02:55 PM

Aimco clutch co in the US are a good lot to deal with.... got my uprated exedy deliverd for about 170!! They have got a shop on Ebay.com & you get the line up tool in the kit ;)
http://stores.ebay.com/Aimco-Clutch-Co_MAZDA_W0QQcolZ2QQdirZQ2d1QQfsubZ7QQftidZ2QQtZkm

Jono

Title: would this be man enough
Post by: batman on July 31, 2008, 09:06:15 PM

cheers jono

Mazda Rotary Club

General => General Technical => Topic started by: batman on July 28, 2008, 11:32:29 PM