Print Page - How have you mounted you coils (single and simplifyed rats nest)

Title: How have you mounted you coils (single and simplifyed rats nest)
Post by: allstaruk on July 10, 2008, 10:29:25 PM

Right guys

I have put my car back together after its small fire lol, as I now have barely any rats nest in there, I dont have all the pipes so how have you guys mounted your coils, are you just using the 2 bolts to secure them or is there a trick i\'m missing?

Alan

Title: How have you mounted you coils (single and simplifyed rats nest)
Post by: allstaruk on July 11, 2008, 09:14:29 PM

Surely some of you must have coils and no rats nest

Title: How have you mounted you coils (single and simplifyed rats nest)
Post by: davehg on July 11, 2008, 10:03:53 PM

you dont lierally remove the metal frame, that supports the coils and allows the fuel to run from the injectors to the bulk head. it also helps support the throttle body.

Title: How have you mounted you coils (single and simplifyed rats nest)
Post by: allstaruk on July 12, 2008, 11:28:06 AM

I know I\'ve got the rats nest off, but the hard pipes are still on there for the fuel lines, it just means that I \'ve only got the two bolts holding at the lead side of the coils holding them down not the one that holds the top of the rats nest down.

A

Title: How have you mounted you coils (single and simplifyed rats nest)
Post by: efiniste on July 12, 2008, 03:26:07 PM

It\'s a while since I did mine so I can\'t remember specifics but I cut the brackets from the rats\' nest down so that only the bits that supported the coils were left.

Steve

Title: How have you mounted you coils (single and simplifyed rats nest)
Post by: interloper393 on July 12, 2008, 03:42:32 PM

Quote from: efiniste;516252It\'s a while since I did mine so I can\'t remember specifics but I cut the brackets from the rats\' nest down so that only the bits that supported the coils were left.

Steve

yeah i done the same, you cn now see the top of the engine under the plenum :) in fact i removed everything i could, even choped down the plenum lol

Title: How have you mounted you coils (single and simplifyed rats nest)
Post by: interloper393 on July 12, 2008, 03:53:46 PM

old pics before n after bud..

Title: How have you mounted you coils (single and simplifyed rats nest)
Post by: TonyC on July 13, 2008, 12:56:02 PM

I got rid of the entire frame and made my own bracket from alluminum for mounting the coils.

Title: How have you mounted you coils (single and simplifyed rats nest)
Post by: allstaruk on July 13, 2008, 02:44:02 PM

Ok looks like I need to look into this then, I have put the coils in with the 2 bolts at the front but I\'m not happy with how well they are fixed down.

Title: How have you mounted you coils (single and simplifyed rats nest)
Post by: interloper393 on July 13, 2008, 03:17:20 PM

have you still got the abs? guys on rx7club have fitted there in that space, but there lhd..

Title: How have you mounted you coils (single and simplifyed rats nest)
Post by: allstaruk on July 13, 2008, 04:48:37 PM

I\'ve got the ABS I\'ve just put everythingk back together and cut up the old rats nest to the coils are in properly now.

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: allstaruk on July 10, 2008, 10:29:25 PM