Mazda Rotary Club

General => General Technical => Topic started by: Jono FD3 on June 29, 2008, 10:44:07 PM

Title: Hid Help!!!!!!!!
Post by: Jono FD3 on June 29, 2008, 10:44:07 PM
Just fitted the HID kit to the headlight conversion on my FD. clicked them on & Oh my god, thought it was daylight again!! left them on for a look at the front end, then they just whent off!! turned them off at the stalk, then turned them back on again..... got the initial start up puls, then nothing!! Left them for a while & tried them again....... 50 seconds of light then off again!!!

What the fook is going on??? this is bugging me now as I have had these light units in & out so many times now I\'m getting pi55ed with them!!

Jono
Title: Hid Help!!!!!!!!
Post by: batman on June 29, 2008, 10:45:58 PM
either a dodgy hid ampliffier dude or not enough volts might need a fresh relay in the curcit
Title: Hid Help!!!!!!!!
Post by: Jono FD3 on June 29, 2008, 10:55:07 PM
Unlikely to have 2 duff amps though?? Relay opperates fine on a std bulb!! the HID units have a surge on start up (30amps) then drop down to 15 amp after the initial second...... surley if it was the relay the lights wouldn\'t start at all??

Battery might be down a little mind?? worth giving it a charge up??

Jono
Title: Hid Help!!!!!!!!
Post by: Timmy on June 29, 2008, 11:08:44 PM
it\'ll be easier to try with the engine running rather than waiting for it to charge.
Title: Hid Help!!!!!!!!
Post by: batman on June 29, 2008, 11:28:05 PM
well you d have thought that jon but ive fitted loads of these things and similar problems with a skyline had 0.3 v to little to work the amplifier but normal bulbs were fine .
Title: Hid Help!!!!!!!!
Post by: Jono FD3 on June 30, 2008, 06:39:59 PM
Sorted now..... Low battery voltage!!

Jono
Title: Hid Help!!!!!!!!
Post by: karl_tate on June 30, 2008, 10:41:54 PM
lol school boy error.

show us some pics then :D

mine draided my battery within 15 mins although they are projector lamps??
Title: Hid Help!!!!!!!!
Post by: Jono FD3 on June 30, 2008, 11:09:55 PM
Just about to put some up mate:

Here they are before with main beam on:
(http://i35.photobucket.com/albums/d192/jonathandudley/REX/SP_A1241.jpg)

Feel the difference between HID & halogen!!
(http://i35.photobucket.com/albums/d192/jonathandudley/REX/SP_A1242.jpg)

Here is my new found dip beam sooooo much better!!:
(http://i35.photobucket.com/albums/d192/jonathandudley/REX/SP_A1243.jpg)

Not quite as jazzy as yours at the moment karl, but I have yet to finish with mine... got the shrowds & lense covers to make this week!!
& before anyone says anything, I know the car is minging dirty........ once the lights are finished she will have a propper birthday!!!

Jono
Title: Hid Help!!!!!!!!
Post by: batman on June 30, 2008, 11:20:21 PM
dam im good lol
Title: Hid Help!!!!!!!!
Post by: karl_tate on July 01, 2008, 06:14:56 PM
look cool jono, which colour rating did you go for??

have you got HID\'s for main and dipped??
Title: Hid Help!!!!!!!!
Post by: Jono FD3 on July 02, 2008, 11:19:35 PM
just dip at the mo..... they are the 4300k units mate!!

Jono