Mazda Rotary Club

Cars by Model Type => 2nd generation RX-7's => Topic started by: R32 Nik on June 06, 2008, 10:11:39 PM

Title: Urgent question!!!!
Post by: R32 Nik on June 06, 2008, 10:11:39 PM
Will an Egi drivers door window fit a TII. We have just had a pone call from the person that is storing Sarahs car saying that the window has been broken.

Please help if you can.

Nik
Title: Urgent question!!!!
Post by: grinder on June 06, 2008, 10:18:49 PM
well the doors fit - so the glass should be the same
Title: Urgent question!!!!
Post by: pdtaylor18 on June 06, 2008, 10:47:18 PM
I have the glass, which side? £20 plus postage or pickup.
Title: Urgent question!!!!
Post by: R32 Nik on June 07, 2008, 12:04:42 AM
That\'s what I thought Stuart.

Thanks Pete but I have an Egi rotting away in the drive at another house, hence the question. Is it a difficult job to get the glass out?

Guess what I will be doing on Sunday then :D
Title: Urgent question!!!!
Post by: grinder on June 07, 2008, 09:53:51 AM
not sure how difficult it is

i assume its a case of remove the trim and remove window :D

although not sure if you have to lower the window half way and then remove it ( or fully ?? )
Title: Urgent question!!!!
Post by: pdtaylor18 on June 07, 2008, 10:15:57 AM
trim you can remove in about 5 mins.  Window glass maybe 20 mins as its fiddley and a bit tight for space but you just have to look at the glass and you will soon work out what has to be taken off.
Title: Urgent question!!!!
Post by: R32 Nik on June 07, 2008, 05:34:52 PM
Ok guys, Thanks.
Title: Urgent question!!!!
Post by: R32 Nik on June 08, 2008, 11:57:31 PM
All done, :) It took longer to clear all the bits of glass out from the bottom of the door and the footwell than it did to fit the new window :D.

Not too bad a job to be honest.
Title: Urgent question!!!!
Post by: grinder on June 09, 2008, 07:44:55 AM
glad you got it sorted :D