any good online stores for these, im after a subtle set as i\'d prefer to leave them off, but its recommended that I use them so better get a set;)
You can get flat key type locks, that are almost flat.
I will take a picture of them when I get home.
Fish
I would also recomend the locking type ... the ones on the rally car get fiddled with frequently by passers by :reallymad ... good job I\'ve left the standard bonnet catch on this time
Have u sprayed your bonnet yet Danny out of interest?
are they like this?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2464891324&category=9895
I have a set similar to those on my FD
QuoteOriginally posted by 20B_boy
Have u sprayed your bonnet yet Danny out of interest?
Not my bonnet any longer.... ;)
Fish
QuoteOriginally posted by ScuttleRX
are they like this?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2464891324&category=9895
Nope, they are hobbile IMHO... The ones I had fitted at nice and flat.
Fish
Here you go.
(http://homepage.ntlworld.com/danny.fisher310/Pictures/Frontal.JPG)
(http://homepage.ntlworld.com/danny.fisher310/Pictures/Side_Close.JPG)
(http://homepage.ntlworld.com/danny.fisher310/Pictures/Side_Far.JPG)
Fish
QuoteOriginally posted by Fish
Not my bonnet any longer.... ;)
Blimey, you must\'ve owed some one big! I thought u loved that bonnet!?
Fish, where did you get those bonnet pins from, and how exactly do they work? Push them in?? And how would that work with the stock bonnet catch fitted, in which order would you push/pull things :confused: lol
Thanks
Ryan
Rich, dont owe anyone anything. Just things are afoot.... Watch this space. :)
Ryan, they twist in to the lock via a key. Under the bonnet next to the wings are two rubber stoppers, they are removed and the securing pins are located there. The RE bonnet (pictured) also has the stock securing bracket, but just wanted something a little more secure.
Fish
Yeah I didnt think much of the ones i posted up either, thats why im on here hunting a different set :)
I like the ones you have, perfect for what I want. Do you know of anywhere that sells them?
Cheers
Andy
ps that bonnet looks familiar;)
I got mine from DS Engineering (01322 387372) in Dartford. I know that they have a set down there as I saw them the other day.
Ooooo, sorry for the free plugging. ;)
Fish
Thanks Fish, i\'ll give them a buzz
they sell ones like mine in Halfrauds.. only about £10 ish
come in silver and gold if ya urgently want them
Nah not in a rush, bonnet is still on the way over, but i\'ll go have a look as it will be easier :)
which bonnet ya going for dude? :D
Rotary extreme N1, basically a AD9. Was hoping to get it on in time for the Topspeed challenge but it doesnt look likely now:( should get it next week sometime.
Gonna have to start sellng some of my bits off soon, i\'ve nearly got a complete standard Rex in the loft :D
sounds nice :D
it fibre glass or carbon?
finally found out my bonnnet is a Stout the other day, gone a year without knowing wtf it is hehe
fibre glass, i wanted it same colour as car and the weight difference werent that much really so I thought id save myself a couple of hundred dollars and get the fibreglass one :)
How did you get on with your gauges in the end, have you got them all hooked up now?
yeah all done mate.. only went for boost (at the mo)
Saved myself 100£ by just using the cool little stand that comes with the gauge rather than the pod. Theres a water temp one fitted, just missing the actual gauge, so if I ever want to put that in won\'t be hard!
At the mo, i\'m planning to go to the ring in summer so I just wanna get everything working nice for that.. MAY do the rad that\'s about it.. though i\'ll tell ya ALLLLLLLL about that at Woodbridge ;)
Hi Scuttle, carnoisssseur also do the flush mount bonnet pins.