Text only | Text with Images

Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: C J R on March 15, 2008, 06:53:35 PM

Title: Sloppy Gear Lever, is this Okay ?
Post by: C J R on March 15, 2008, 06:53:35 PM
Hi Guy\'s,
I have finally chosen my new single turbo car, went for a test drive today, excellent Seller, (member on this forum), however one point we were both unsure about, so can anyone offer advice.
 
The car is a 1992, now a single turbo producing 377bhp at wheels at 1 bar.
The gear lever is very sloppy in neutral and equally sloppy when engaged in each gear. But it selects each gear easily and did not jump out of gear.
 
What can cause this effect and should I be concerned ?
 
Thanks
Chris
Title: Sloppy Gear Lever, is this Okay ?
Post by: rx7veilside on March 15, 2008, 07:11:31 PM
there is a collet on bottom of gear lever it might be worn..easy to replace
Title: Sloppy Gear Lever, is this Okay ?
Post by: C J R on March 15, 2008, 07:25:10 PM
Hi,
Could you direct me to any information on this collet, ie; how to replace it, where to buy one from ?
 
Any help is appreciated.
 
Thanks
Chris (http://www.mazdarotaryclub.com/forums/images/icons/icon7.gif)
Title: Sloppy Gear Lever, is this Okay ?
Post by: jay999 on March 15, 2008, 07:32:25 PM
buy a shortshifter kit and it will solve your problem straight away nothin to be worried about
Title: Sloppy Gear Lever, is this Okay ?
Post by: C J R on March 15, 2008, 07:34:59 PM
Thanks Jay999,
Can you recommend one ?
Title: Sloppy Gear Lever, is this Okay ?
Post by: AshRX on March 15, 2008, 07:41:25 PM
B and M do a good one
Title: Sloppy Gear Lever, is this Okay ?
Post by: rx7veilside on March 15, 2008, 07:52:52 PM
the bm doesnt come with a new collet though it takes the old one from orig stick
the short shifter is an aquired taste and can be described at notchy..very precise and very short but to be honest will prob put an orig shifter back in mine at some point
Title: Sloppy Gear Lever, is this Okay ?
Post by: AshRX on March 15, 2008, 07:58:33 PM
plus they wine a little

have a look on //www.rhdjapan.com they do a few on there
Title: Sloppy Gear Lever, is this Okay ?
Post by: C J R on March 15, 2008, 07:59:01 PM
Hey RX7 Veilside, is that a subliminal hint that your short shifter may be for sale at some time in the future ?? (http://www.mazdarotaryclub.com/forums/images/icons/icon10.gif)
Title: Sloppy Gear Lever, is this Okay ?
Post by: rx7veilside on March 15, 2008, 08:13:26 PM
prob not in enough time to help u as i havnt got the time to even get it swapped over..dont get to use my car much let alone work on it
Title: Sloppy Gear Lever, is this Okay ?
Post by: Nik da Greek on March 15, 2008, 10:46:01 PM
B&M shifter is definitely an accquired taste. I think mine\'s great, but it does take a bit of getting used to, its very stiff till it all warms up a bit (and the shifter!). Like Ash said, it does whine, and like RX7Veilside said, you do need to re-use the doobrie off the bottom of the original gear stick (and you need thumbs like steel traps to squeeze it on the new one, too!). When I swapped the B&M onto my new Rex, the standard gear lever on it was knackered, all the seals were torn and perished, flopped about like a pr!ck in a shirtsleeve, but my first car, it wasn\'t so bad. They were the same age and similar mileage, so dunno why such a difference, but to cut a long story short your gear shifter may just simply be worn out. Worth having a look, very easy to get to
Text only | Text with Images