Mazda Rotary Club

I just had a thought that a sticky thread could be put up, with parts numbers of often needed items, prices charged, quality of service and where they were bought from, with respect to mazda dealers (possibly other places if cheaper/better)  

This would give us all an idea of what dealers are import friendly, how much they charge for a set item and what the exact part number was, so that the desired part can be ordered easily and you\'d know whether you were being ripped off or not.

We could start off with the water pump as i\'m sure alot of people would be interested in the part number of this type of item, how much it was and what dealer it was from

Other things could be, oil filter, fuel filter, the rx8 illuminating gear knob:cool  , OE air filter, engine/diff mounts, rear bushes etc etc etc.....

What do you guys think?

Kind Regards,

Paul:)

Good idea.

Maybe could add helpful dealerships into it.  Would be handy.  My nearest Mazda parts is in Ashford and are friggin awful!!!!  Wouldn\'t quote me for a fog light switch as I didn\'t have a part number.  Explained there wouldn\'t be one as jap cars dont need fog light  and that I was after uk spec but no, not interested.  Name and shame thats what I say.

Neil

Here you go Paul:

Water pump/housing - N3A115100A - £62.70 +VAT
Gasket for Water Pump - N3A115116 - £3.88 +VAT
Gasket - N38615162 - £2.12 +VAT

And a big-up for Lythgoe Mazda in Bolton...very helpful indeed

Neil,

I\'ve always had the same problem with Blackpool Mazda, they are not prepared to search a part without a valid UK chasis number, Perry\'s of Preston\'s Mazda dealers do the same.
Maybe we could find out a valid UK chasis number, and all use the same one so we can use the Mazda Dealers as if we had UK RX7\'s !


Ben

Cheers Ben,

Is looking good, we just need someone in the know, to put up a table at the top with this information entered (bit like the 1/4mile table) and to also make it sticky:bandit

Cheers,

Paul:)

Ok i\'ve got some more from Gordon Lamb in Notts. Have just ordered oil filter and circlip for driveshaft/diff locator. Also got quotes for OSR wheel bearing, fuel filter and air filter.

I\'m going to put up a table later on this evening on the first post.

Oil Filter                              B6Y1143Z40     £5.90
Circlip DS/DIFF locator        P01727421A     £2.03
Air Filter                              N3A113Z40      Â£24.0
Fuel Filter                           N3A12490         £35.0
OSR Wheel Bearing            J00126151        Â£98

*All prices are plus VAT

Please make this post sticky Mr Moderator:D

Cheers, Paul:)

My Local dealer (Wrights in Norwich) needed a chassis number before even an enquirey could be raised and told me delivery would be approx 6 weeks for anything i ordered.

So i called jimmy\'s:
knock+throttle position sensors off the shelf £60+VAT.

Cool:cool, you got the parts number anywhere??, so you can post them here:D.

I used Clive\'s UK chassis number; he just recently posted it on a clutch thread, if you want to search for it or i can pm you. But i don\'t want to blatantly write his chassis number all over the boards for obvious reasons:)

Cheers, Paul:)

i got quoted £300 + vat for a water pump dont worry did not buy it fixed the rubber gasket on pump any one know anywhere up north that can supply genuine mazda parts as i need w/housing and gasket


thanks

G

Think WGT in Northwich gave a quote of less than the one listed above for a full water pump. And i\'m sure they are cheaper than mazda for most items and have a very good reputation on here.

Hope this helps,

Paul:)

This seems like a very good idea.
Don\'t suppose the same could be done for the FC by any chance?

Here is a new code for FD3S wheel studs:

Wheel studs     J00Y - 33 - 062  Â£3.26each plus VAT

I got them from Gordon Lamb in Nottingham and the young lad that works there already knows my name :eek and is a helpful chap:). Just hope it doesn\'t get like it did with the peeps at renault when I used to own my 5, i\'m pretty sure they used to rub their hands together in anticipation when they knew i was coming, due to the amount of cash I spent there :rolleyes:, lol however they were also nice blokes and ended up giving me a trade account ;)

Paul:)

Anyone know the part number for the black rubber stops in the boot that sit just behind each taillight under the plastic covers?? Think mine have worn down and contributing to the hatch squeak noise.

Took a bit of finding, but here it is...

FD01-62-681C (Wedge, Liftgate) 15.60 each

Cheers,

Richard

There the ones! thanks very much! :D

There\'s a new Mazda garage in Sighthill in Edinburgh...... good prices, seemed very keen to get me anything I wanted (with or without a chassis number) just to encourage me to come back to them. Think it\'s cos there\'s another Mazda garage about 3 miles away so they\'re looking to take as uch business from there as possible.

They all stood around the FD pointing and going ooohh aaahhhh! Don\'t think they\'ve ever seen one at all! hehehehe   :D

Murray Mazda - Sighthill Edinburgh, might not be in the book yet but phone Murray Volvo in the same place (it\'s one big garage) if yo can\'t get the number

I use Northwood garage on the Isle of Wight and they are usually very helpful with or without part no but it’s allot simpler with.
I\'ve got a copy of the Mazda epc with last years price list and Nortwood’s prices usually seem to be the same.
:)

Hi There,

Not sure if this is helpful,  but //www.iluvmyrx7.com
carries all the Mazda workshop manuals and Parts Fiches for FCs and FDs. Not had a detailed look but don\'t the Parts Fiches list all the parts and their numbers ? Worth a look. Go to 2nd Generation -> Things To Read -> Manuals -> Parts Fiches and download the pdf.

Phil

Quote from: evildaveMy Local dealer (Wrights in Norwich) needed a chassis number before even an enquirey could be raised and told me delivery would be approx 6 weeks for anything i ordered.

Wrights have improved as I\'ve ordered a few things from them and they\'ve always been fine with no chassis number and me telling them the car\'s an import. Items have taken a couple of days to arrive.

Latest order:

Part No: N3A115610A
Description: SENSOR, WATER LEVEL
Price: £23.74 + VAT

Cheers,

Alex

TO SQUEAKY   -                                                                                              dont know if you got a fog light switch but a company called durite do a great universal round rocker switch in black about 12mm across with built in led that goes in any dash for any reason, any good auto electrical or motor factors will deal with them.

Im looking for the part number for the cushioned interior panel that is right next to your left knee, mine ws stolen and i need to get a replacement part number to get a price from Mazda for a replacement. Anyone help or direct me to somewhere i can get the number?

Cheers

Donato

Big thumbs up for Robinsons Mazda in Leicester,parts guy there is very helpful and no problem with the import chassis numbers,enquirys usually have a 2-3 day turn around.
Bought loads of bits from there.Also VERY helpful with locating parts for my Cosmo 20B,the look on their faces when I took it in for an MOT,is it really a Mazda they asked......??

Some dealers are import friendly,some are not,they told me they\'d be silly not to cater for them as the parts side of things is worth alot in terms of turnover.

Need part number for mazda 2 piece 2mm apex seals also need numbers for \'86 non turbo rotor housings.

FD Engine gasket set Mazda part number, PART # 8DFH-10-271

Quote from: ArmyOfOneNeed part number for mazda 2 piece 2mm apex seals also need numbers for \'86 non turbo rotor housings.

http://www.rxmotors.co.uk/fdengines.php

:)

Just been given this

http://www.mazdamotorsports.com/wcscp/userHtml/933b.html

Has the Parts number Brake down of most engine Componets.

Plus the Imfamous Green inner and outer oil control seals :)

Has anyone got the Part number for the plastic hooks that the Rear shelf Strings fasten to on the Tailgate...

I\'m just having a problem ordering a pair from my Local dealers so it would be appreciated if some one has been there before.

I want to order a new oil, air and fuel filter, spark plugs and oil.

Shyautos phone going on voicemail, Halfords and Mazda Warrington were about as much use as a third armpit!

Can anyone send me in the right direction - happy to order online.

Rgds

ATD.

Why not PM Clive on here (Shyauto)

Oil filter for most late model mazda spin on type applications (including RX8)
B6Y1 14302 A

Uprated Mazdaspeed filter for same applications (contains magnet, better filtration, different valving regulates hi temp oil pressure etc, also pretty blue colour)
QYY1 14302

RX8 aluminium fuel filler lid
F151 V4640 F

Illuminated RX8 manual gear knob
black:  F151 V8170F 04
Red:    F151 V8170F 15
Brown: F151 V8170F 23

I will try to supply no.s to anyone that wants them, just ask!!!!

im after some gaskets for the inlet plenum chamber and exhaust manifold. ne 1 no who does gud prices on these. Need my car back on the road :-(

which exhaust manifold gasket do you need? is it manifold to block? or manifold to turbos?

i need the exhaust manifold to the block (i think it comes in two peices) stock manifold of corse and the the inlet plenum chamber gasket

They are expensive. Around 145 quid for both of them. I have a pair brand spanking new I was selling but then decided to use on my rebuild. 95 quid will prise them away from me delivered to your door.

you\'ll find most of the gaskets on here, and in stock.
http://www.rotaryart.uk.com/acatalog/New_3rd_gen_engine_perf_tuning.html

oh nice one mate - i\'ll check it out.

I just brought the centre console front fog light switch for my imported RX-7 from Haymill Mazda in Farnham Common (on the A355 between Beaconsfield - Slough).  Seem like nice guys the part wasn\'t in stock but was avaliable for collection within three days.  

Front fog light switch

Description: Switch,RR.FOG
Part no:       FD14 66 480A

Quote from: one2watchThey are expensive. Around 145 quid for both of them. I have a pair brand spanking new I was selling but then decided to use on my rebuild. 95 quid will prise them away from me delivered to your door.

sorry mate, jus checkd me mail.

Thos gaskets still for sale?

which ones have you got?
basically i need exhaust manifold to block gasket. (comes 2-peices)
need inlet plenum gasket
turbos to manifold gasket
turbos to downpipe gasket
and finally downpipe to cat gasket.

If any one has also got a performance cat they are selling im interested.

indeed they are. Ive only got the block to manifold gaskets (both pieces one for each housing). But at 95 quid, they represent a huge saving over the 145 quid mazda charge!!

Heres another

FD: Sensor, Air Temp - N3A118845 - £27.01

Quote from: Evil TwinI just brought the centre console front fog light switch for my imported RX-7 from Haymill Mazda in Farnham Common (on the A355 between Beaconsfield - Slough).  Seem like nice guys the part wasn\'t in stock but was avaliable for collection within three days.  

Front fog light switch

Description: Switch,RR.FOG
Part no:       FD14 66 480A

Sorry my mistake it was the Rear fog light switch that I purchased as used on the UK cars.

Description: Switch,RR.FOG
Part no:       FD14 66 480A
Price:          Â£24.85

Stab in the dark (as I\'m lost between hard disks atm :() - but anyone have any of these part numbers?

JC Cosmo 13B-RE lower inlet manifold gasket
JC Cosmo 13B-RE upper inlet manifold gasket
JC Cosmo 20B-RE lower inlet manifold gasket
JC Cosmo 20B-RE upper inlet manifold gasket

Cheers, couple of hours trawling emails and hard disks I foresee :-/

Anyone have the part number for the filler neck from the FC that we need if we are to get rid of the AST?

Many thanks in advance...

Just a quick mention for Malloy Mazda in the US. Get in touch with Raw Crowe: 00 1 888 533 3400, email is hmkparts@aol.com

Top bloke and you won\'t even need part numbers as he knows them off the top of his head!

Quote from: robedwards99Heres another

FD: Sensor, Air Temp - N3A118845 - £27.01

Hi All,

Be very careful with the prices as I have found that Mazda release price codes to dealers once a month meaning prices can go up, but it also means that prices somtimes go down as well:Thumbs-up ,

We now quote every standard part because of this on enquiry only.

And will not be able to put standard Mazda prices on our new shop when it goes live because of this.

Hope this helps

We have always had Mazda parts priced and displayed on our shop, Ive only ever noticed price increases once or twice a year if that, Im usually kept pretty much up to date, if Ive been busy it means a customer has picked up an item for slightly less, until I get chance to updat.
You can click on some of our pictures to expand to a larger picture which will often show how it goes together.
The Mazda pricelist which I have in 2 formats is massive, and Im still trying to work out a way to import striaght in to my shop, but at the moment I manually enter each one. Because of that not everything is in there, but normally a quick email to me with the part you are looking for, and I\'ll put a picture of it and a product on my shop for easy ordering.

Follow this link
http://www.rotaryart.uk.com/acatalog/New_3rd_gen_engine_perf_tuning.html
then click on the image that says engine gasket set for instance, or turbo gasket. it will open up to a bigger picture with all items listed.

Bought These From Import Solutions Pricey But Can Get U Anything U Want New.
FD3S
Wing Liner-   Usaf138-56-130a.£69.54+vat
Wing Liner-   Usaf138-56-140a.£69.54+vat
Fuel Guage-  Usaf138-55-481.£52.90+vat


Import Solutions-01285 647847

have those on our site
http://www.rotaryart.uk.com/acatalog/New_Mazda_RX7_3rd_gen_ext_body_styling.html

Would recommend Robinsons Mazda in Leicester,speak to a guy in the parts department called Steve.
 
Very helpful, trying to replace a hose i sliced, gave him the part number and it doesn\'t exist on the Mazda UK system so he went off and organised getting the JAP part number raised as a UK part number so he could supply the part, i live in Brixton which is nowhere near Leicester but they are more than happy to post and package the part.
 
Steve said they are always happy to help and build on their experience with imports RX7\'s so for genuine parts, give them a go...
 
Incidentally, i only called them after reading this thread so thumbs up for the idea of this thread !

Does anyone know the part number for a \'Solenoid Valve (Charge Control)\'

Thanks,
James.

If you give me a part number I can get you anything OEM Mazda straight from Japan (as long as Mazda Japan still has it in stock)

Speedworks@pandora.be

I can also help out here as I have the complete R.H.D Genuine Mazda EPC (Electronic Parts Catalog) for Mazda cars and Trucks sold in the UK and Australia from 1985 on wards.

I also have some are PDF Parts books on the RX-3, Cosmo and a few other rotaries.

So if you want genuine part numbers I can help.

You must tell us what Year and or Model Mazda (i.e. RX-7 or RX-8 or 626 or 323 or Mazda 2,3,5,6) you are talking about...
In most cases a Chassis or VIN number will reveal everything, that is the JM_ _ _ _ _ _
one., or the S124A_ _ _ _ _ _ .., LA23S_ _ _ _ _, or CB2MS_ _ _ _ _ .