As above, anyone done this: Click (http://robrobinette.com/turbo_system_simplification.htm)
And if so how does it perform and is it worthwhile doing?
Thanks
Rob
:Thumbs-up
yup, done it, turbos work exactly the same as before just lose the emissions stuff. i did it to save myself some heartache when redoing the hoses.
also you can go further, reading on the rx7club website you can do away with the solenoid for the fuel and just run a vacuum hose straight to it. also if you use an aftermarket boost controller you can connect it to operate both turbos (look up \'version 2\') on the rx7 club website) and either run a hose from the turbo inlet to the fuel injector breathers or just cap them with the filters you find on a couple of the solenoids (they just need filtered air)i am planning on doing the fpr/ injectors and removing the stock boost solenoids once i decide what boost controller i want.
Marco
How hard a job is it? I\'ve done the rats nest replacement before so i have a fair understanding of whats going on under there.
Not worried about the emmisions, already de-catted so not much of a change i dont think
Oh and the solenoid for the fuel, is that the one that goes to the charcole cannister via the catch tank?