Print Page - Home made FB Strut brace Link.

Title: Home made FB Strut brace Link.
Post by: shaunwil on January 12, 2008, 09:22:03 PM

Came accross an interesting link. Thought I\'d share :D

http://www.rx7club.com/showthread.php?t=720581

Shaun

Title: Home made FB Strut brace Link.
Post by: kiwimazda on January 12, 2008, 09:57:16 PM

Thats rude.
All I did was get an early Subaru Impreza strut brace and put it on back to front, Had to redrill a hole on each side and its adjustable in the middle as well. Took about 10 mins.

Title: Home made FB Strut brace Link.
Post by: captainbizzaro on January 13, 2008, 08:17:32 AM

Quote from: kiwimazdaThats rude.
All I did was get an early Subaru Impreza strut brace and put it on back to front, Had to redrill a hole on each side and its adjustable in the middle as well. Took about 10 mins.

eBay here I come....woohoo!:King

Title: Home made FB Strut brace Link.
Post by: mpk490p on January 13, 2008, 09:14:43 AM

you can get whiteline ones from demon tweeks
http://www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=MSPORT&pcode=WHIKSB561
http://www.demon-tweeks.co.uk/products/appdata2.asp?manf_id=33&manfdesc=Mazda&code=WHITELINE_STRUTBRACE&app_id=106137&x=94&y=8
just depends on the look and pennys you have!! :Thumbsup!

Mark

Title: Home made FB Strut brace Link.
Post by: Don Pamponi on February 02, 2008, 07:41:47 PM

Thats wot I got! Had to order mine from OZ back then tho.... wonder if they do a rear one?

Title: Home made FB Strut brace Link.
Post by: mpk490p on February 02, 2008, 08:11:50 PM

Quote from: Don PamponiThats wot I got! Had to order mine from OZ back then tho.... wonder if they do a rear one?

Don,
your still about then!!
they dont but i wouldn\'t bother with one, there about as much use as a fart in a wind tunnel (unless you want something to put a 6 point harness!)

Mark

Title: Home made FB Strut brace Link.
Post by: Don Pamponi on February 04, 2008, 08:03:39 PM

I just like shiney things....

Mazda Rotary Club

Cars by Model Type => 1st generation RX-7's => Topic started by: shaunwil on January 12, 2008, 09:22:03 PM