Print Page - changing apexi->stock ecu

Title: changing apexi->stock ecu
Post by: anthony on December 24, 2007, 11:32:03 AM

how easy it to replace the emerald with a stock ecu? can i use the existing wiring or will i need to run something else? will it just plug in and work?

Title: changing apexi->stock ecu
Post by: Jit on December 24, 2007, 11:34:45 AM

you mean ur going back toa stock ecu? if yu are, then the ecus are plug and ply so it should just plug in...

Title: changing apexi->stock ecu
Post by: Kevin on December 24, 2007, 11:34:46 PM

Is you car standard or modified?

If it is standard then will be just a simple case of plug and play, if your car is modified, then depending on how modded it is you could be waving bye bye to your engine when boost come in!

Title: changing apexi->stock ecu
Post by: elford_tim on December 25, 2007, 05:56:17 AM

I\'m a bit confused by the first post - does the OP have an Apexi PFC or an Emerald ECU in the car?

Title: changing apexi->stock ecu
Post by: RemarkLima on December 25, 2007, 10:11:55 AM

I think Emerald must be a force of habit thing, a *very* popular (and very good) after market ECU for the K-Series engines (Lotus Elise, CateringVan 7\'s etc...) plus can run a load of Ford engines and other V8\'s and such like.

Shame it can\'t run rotaries, made here in the UK and some very good experience with tuning it!

http://www.emeraldm3d.com/

Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: anthony on December 24, 2007, 11:32:03 AM