Hi all,
started the rex up today and have noticed that I\'m getting a noise from the clutch. it\'s only when the cltch is engaged, but goes away when I put my foot on the pedal. Am assuming it\'s the release bearing on the way out, but on other cars I\'ve owned the symptoms of release bearing failure seem to be the other way round.
thoughts and opinions?:D
Thanks chaps
Sounds right way round.
Sounds like a good exscuse to change the gearbox oil then:2Rolleyes
cheapest place for a standard clutch?:)
Mazda clutch and bearings
http://www.rotaryart.uk.com/acatalog/New_Mazda_RX7_3rd_gen_engine_perf_tuning.html
If you have a stock clutch same page you can buy just the plates.
Or ther is ADL
http://www.rotaryart.uk.com/acatalog/FD_RX7_transmission.html
Again all parts can be bought seperately
G/Box oils.
http://www.rotaryart.uk.com/acatalog/Royal_Purple_motor_oils_Max_Gear.html
Quote from: ohmsSounds like a good exscuse to change the gearbox oil then:2Rolleyes
cheapest place for a standard clutch?:)
Yep release bearing is dead,
Bit of advise for you that may help,
Only change just a the center plate if you are 100% sure that the pressure plate fingers are O/K and there is no distortion or discoloration to the friction face, besides buying the bits normally works out to be very little difference price wise to a complete clutch assembly.
Here is the full Exedy clutch trouble shooting guide.
http://www.exedy.co.uk/index.php?main_page=troubleshooting_guide
You asked for the cheapest price out there and it\'s quite possible we are at £287.88 inc vat delivered, also it\'s an Exedy clutch which is fitted to these cars on the production line.
More details can be found here if you wish to buy,
http://www.mazdarotaryparts.com/bfd-ct001-exedy-standard-3-piece-fd-clutchb-729-p.asp
Hope this helps.
The one we offer is also Exedy but is less that £200 delivered.
Folow our link above for deatils.