Text only | Text with Images

Mazda Rotary Club

Cars by Model Type => 1st generation RX-7's => Topic started by: Dai on October 20, 2007, 09:42:06 AM

Title: Hi There
Post by: Dai on October 20, 2007, 09:42:06 AM
Just thought i`d say Hello:wave Ive found your forum while i`ve been trying to find parts for a 84 Gen 1 for my misses,Some great info on here im sure youll be getting some questions from me in the future.
Cheers for the link Mark:Thumbs-up
Title: Hi There
Post by: chrisJDM on October 20, 2007, 09:57:55 AM
Hi Mark

Welcome to the site, you ave definetly come to the right place, theres plenty of guys on here that know there stuff on all the different generation rx7s.

:Thumbs-up
Title: Hi There
Post by: mpk490p on October 20, 2007, 10:19:13 AM
Quote from: DaiJust thought i`d say Hello:wave Ive found your forum while i`ve been trying to find parts for a 84 Gen 1 for my misses,Some great info on here im sure youll be getting some questions from me in the future.
Cheers for the link Mark:Thumbs-up
Hi Dai,
how long before the tank arrives?

Mark
Title: Hi There
Post by: Dai on October 20, 2007, 06:09:44 PM
"Hi Dai,
how long before the tank arrives?"

Hi Mark, should be arriving midweek,fingers crossed, its the last job before the MOT,Im hoping to get it on the road for 1st November
 
Cheers for the welcome Sweetiewells
Title: Hi There
Post by: clive on October 20, 2007, 06:51:13 PM
Welcome to MRC Dai,

You have probably found this out all ready but your RX-7 is now rapidly becoming rare here in the U/K,

Hope all goes well for you getting the car on the road:Thumbs-up
Title: Hi There
Post by: captainbizzaro on October 20, 2007, 08:57:13 PM
At last another 1st gen!!!:wave :wave:wave:wave:wave:wave:wave
 
Warm welcome mate good luck with the MOT.
 
Tim
Title: Hi There
Post by: David Nock (RIP) on October 20, 2007, 10:39:55 PM
Hi Mate and welcome. Always on the look out myself, for 1st gen parts for \'Gus\'.
Quite close to you in South Yorks.
Title: Hi There
Post by: daverey on October 20, 2007, 10:57:46 PM
Welcome to the club, glad to see another 1st gen.
 Dave
Title: Hi There
Post by: shaunwil on October 21, 2007, 12:41:24 PM
Welcome to the club. I drive a 1st gen everyday and its good fun and seems to be very reliable even on LPG :D

Shaun
Title: Hi There
Post by: David Nock (RIP) on October 22, 2007, 11:52:23 AM
Quote from: David NockHi Mate and welcome. Always on the look out myself, for 1st gen parts for \'Gus\'.
Quite close to you in South Yorks.

And following on from that, I have got a few parts that I\'ve "overcollected" and would part with. These are a set of plugs (new) NGK BR8ET, struts for glass hatch (new, from US), A glass hatch from an early 1st gen and a 14" \'Sonic\' wheel (not pretty but servicable). Just a note for your information.
Title: Hi There
Post by: Dai on October 22, 2007, 07:27:29 PM
Thanks to everyone for the welcome ,it seems like a freindly place:WaveBye
 
Quote from: David NockI have got a few parts that I\'ve "overcollected" and would part with. These are a set of plugs (new) NGK BR8ET, struts for glass hatch (new, from US)
Could be interested in the above parts David coz im sick of the Hatch landing on my head:( and im due to service the car very shortly so the plugs would come in handy
Title: Hi There
Post by: David Nock (RIP) on October 23, 2007, 12:33:30 PM
Send us an e mail Dai, when you\'re ready. dgnockatbtopenworlddotcom
With regard to the strut, 1 strut does the trick on its own. Coming from America they \'flip\' 180 degrees to fit. Consequently the offside ( the wiper contact side) is a problem. But honestly 1 only on the nearside does the job perfectly as others on here have reported. It\'s a 5 minute fit but you have to be bold and hacksaw the C Pillar ball joint off to get a socket on it. An open ender isn\'t good enough.
You can always come and looksee.
Text only | Text with Images