Mazda Rotary Club

General => General Technical => Topic started by: justFD3s on October 13, 2007, 11:35:44 AM

Title: got a problem with my single turbo conversion...
Post by: justFD3s on October 13, 2007, 11:35:44 AM
Hi

first my spec:
To4z HKS kit
Engine Bridge & Side ported
decat pipe
greddy titan muffler
airpump removal kit
apexi power fc

at 220kmph the car lost a very short time the boost,
after that the car did sound different and was shaking a little,
but it had still the same power
after 300 km it lost again the boost for a short time,
but after that the engine revs very bad, its shaking enorm at idle and it feels like i have only got a 100 hp

i have just checked the turbo, but it looks fine
so what could be the problem?
wastegate, engine (apex seals...) or just some vacuum tubes?
what should i check?

could it be because 2 weeks before i removed the racing cat(100cells)?

thanks for the answers

greetings Patrick
Title: got a problem with my single turbo conversion...
Post by: memski on October 13, 2007, 12:24:31 PM
Sounds like you\'ve lost an apex seal or two, compression test it dude.
Title: got a problem with my single turbo conversion...
Post by: Red and Single on October 13, 2007, 01:19:27 PM
What AR is your hotside ?