Print Page - sard FPR in and out

Title: sard FPR in and out
Post by: Eddie on October 04, 2007, 09:12:22 AM

Any one know which is in and which is out on the sard standard FPR please.
It has a bottom and a side nipple, or doesn\'t it matter?

Cheers

Title: vac line
Post by: Eddie on October 04, 2007, 09:29:23 AM

Also can the vac line which used to go to the solenoid from the FPR just go to the plenum, so can I get rid of the old solenoid int he nest?
I am also fitting a guage can I take it fromthe side of the regulator or does it need ot go in any particular fuel line

Cheers

Title: sard FPR in and out
Post by: antnicuk on October 04, 2007, 09:38:49 AM

generally the side is the in from the fuel rail, the bottom is the out to the tank, any gauge will need to be fitted between the pump and the \'in\' but generally T\'d off between the rail and the FPR. Take the vacume line from the plenum after the T/body.

Title: thanks
Post by: Eddie on October 04, 2007, 10:53:20 AM

You are a gent thanks for the info.

Cheers

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: Eddie on October 04, 2007, 09:12:22 AM