Probably been asked a thousand times, but I can\'t find the answer.
I bought an induction kit on ebay like so: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=140158050743&ssPageName=STRK:MEWN:IT&ih=004#ebayphotohosting (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=140158050743&ssPageName=STRK:MEWN:IT&ih=004#ebayphotohosting)
Problem is, there are no instructions with it and I have no idea what to do with the smaller hoses that go into the airbox. Can someone give me some help please?
Thanks :)
Kym
The kit doesnt look that smart but...Post a pic up of your engine bay and the new kit and il try and guide you through it :)
ok do you still have your airpump fitted? as i have the same piping but not using those airfilters. I am using HKS filter instead.
As i have removied my airpump I did not need the smaller hoese so they were blanked off. all except one with i put a crankcase air breather on it. they are rater small airfilters ;). If you need pics i can post. just pm me
Thanks guys :)
Yes, I still have the air pump fitted, and I think the other hoses also go into the turbos? I tried to get some breather filters from motorworld last night, but they only had 12mm ones which are too small I think.
Draco, could you post a pic please? What size breathers did you use?
(Rixio, I can\'t post a pic of my engine bay, as it takes 2 people to open the bonnet at the moment - release cable is knackered. It\'s a standard FD air box though)
This looks a similar set up to mine, i\'m using K&N filter i got from Rotaryart, there should be about 4 smaller diameter pipes that lead into/out of the old air filter, the 2 that come from the standard blow off valves/ reflief valves can be vented to the air as they do not \'suck\' in air they vent it. The two remaining go as mentioned into the air pump and need a 1 inch flange. I used this link and found it very helpful: Clicky (http://www.rx7.org/Robinette/kn_filters.htm). I\'ll try and get some pics up for ya bud. HTH
Just to let you know, I got a couple of breathers from Halfords at the weekend and successfully fitted the kit. Thanks for all your help guys :) now I just have to work out what is causing there to be oil coming out of one of the turbo intake hoses...