It is a story about my JC Cosmo 13B-RE JC3SE.
I bought it in 2004 from Siberia.
The engine was blown. The car was a garbage virtually.
The engine was dismounted and taked apart in winter 2004-2005.
I didnt know what the hell is a rotary engine at that time. Where are pistons?
The process of reborn was strated...
All of the work was made by my own hands (exept body). The work is not done by the way...
Mods list:
street ported 13B-RE
HKS rewelded manifold
Turbonetics T61 turbo
Tial 46mm WG
4 inch (100 mm) downpipe
Custom IC
Subaru Koyo Racing radiator
Flyidine oil cooler with thermostat, custom oil lines
KG fuel rails 850/1680CC Bosch motorsport injectors
Dual sequential walbro 255 lph set, dual braided fuel lines
Aeromotive 1000 FPR
Manual transmission from FC3S
FC Starter
Custom (T2+JC) driveshaft
OS Giken twin plate, FC+FD+LADA hydraulics
Haltech E11V2 ECU
Autronic 500R + 4 LX92 direct fire coils, crane cams wires
Innovate wideband
Couple of simple gauges
Custom engine harness
Custom power harness
custom dash - like in airplane :)
Battery in boot
This season tasks:
Big exhaust
D2 Racing coilovers
D2 8/6 pot brakes
D2 Race seats
D2 harness
hydraulic handdbrake
Rear end
Cage
Momo steering wheel withs hub
MT slicks
And.......... a bought 20b-RE last month :D
Some picks:
(http://photofile.ru/photo/caesar/1126045/large/28107187.jpg)
(http://photofile.ru/photo/funklove/2035399/large/33097847.jpg)
(http://photofile.ru/photo/funklove/2035399/large/33097814.jpg)
(http://photofile.ru/photo/funklove/2035399/large/34255761.jpg)
(http://photofile.ru/photo/funklove/2035399/large/34255833.jpg)
(http://photofile.ru/photo/caesar/1126045/large/35764650.jpg)
(http://photofile.ru/photo/caesar/1126045/large/36408504.jpg)
(http://photofile.ru/photo/funklove/2780011/large/54457650.jpg)
(http://photofile.ru/photo/funklove/2780011/large/54457635.jpg)
(http://photofile.ru/photo/funklove/2780011/large/54457682.jpg)
(http://photofile.ru/photo/funklove/2780011/large/56299695.jpg)
First start "Gasen-Vagen"
(http://photofile.ru/photo/funklove/2880238/large/57755868.jpg)
Welcome to Mazdarotary club and well done saving the car

Great project! Keep us updated.
Good work - well done on bringing it back from the dead :D
Looks awesome! Let us know how the 20b goes.
Regards
Jon
Awesome Looking Car !!!
Well done, look forward to seeing the 20b :D
Nice work, it was just crying out for a 20B best of luck.
I have to keep looking at that paint - it\'s really growing on me. :yes
I guess you\'ve got a 13B-RE block going spare at some point then, if you dropping a triple in there.
Looks good.:cheers
Thank you for replies!
Well, I finally upgraded ignition setup yesterday! Autronic + Crane Cams Coils and wires give me a strongest spark fire ever!
I have a 20B, but not have enought time, money to start and finish new project. 13B is a big money sucker... 20B is money sucker twice!
(http://photofile.ru/photo/funklove/2880238/large/64802324.jpg)
From Russia with love..........
:Thumbsup!
wow, looking very fab. Kev is the best guy to talk to, he has a similar ecu setup :D
Shaun
That\'s one stunning Cosmo. Did it come with that front lower valance or is there a source?
Great work, colours growing on me
It\'s not often I look at a car project open mouthed! Very well done, and very impressive work...
Hi
If you haven\'t been on this site
http://www.dmrh.com.au/main.htm
well worth a visit.
John
Congrats on the time and effort you have put into that car. Even more so since you were originally looking for the pistons!
Quote from: Gaijin-SamuraiThat\'s one stunning Cosmo. Did it come with that front lower valance or is there a source?
It is fully custom.
very impressive indeed, especially as i can imagine cosmo\'s are far from plentiful in russia! should be able to get away from the rotary powered lada\'s in that one!
I am amazed at this mate, you have made the Cosmo look incredible with the orange paint !!!!
More pics more pics !! Cant wait to see it finished.
I think you are gonna make more people want one !
Great project !!!!
greetings from Lithuania. good luck with this car.
Was long and cold winter in Russia..
"photofile" lost half of my cosmo photos :(
(http://photofile.ru/photo/funklove/2780011/large/98165454.jpg)
Little e-fan
(http://photofile.ru/photo/funklove/2780011/large/98062998.jpg)
e-fan driver
(http://photofile.ru/photo/funklove/2780011/large/98063157.jpg)
Rx-8 part ;)
(http://photofile.ru/photo/funklove/2780011/large/98063849.jpg)
D2 stuff on JC
(http://photofile.ru/photo/funklove/95112344/large/98384965.jpg)
Nice work there - This is going to be one awesome machine when finished :yes
eeee!!! Russia :)
yes, well done. Now go back to sleep...