Print Page - RX8 tailshaft and a 13b series4 starter...

Title: RX8 tailshaft and a 13b series4 starter...
Post by: Kaptainbalistik on September 13, 2007, 05:23:05 AM

Hi all again , more RX8 stuff needed...to stick RX8 box into....

(http://alliancemotorsport.org/gallery/d/13293-1/aav1.jpg)

This
Now, Can I use a Gen 2 turbo starter ( with some spacers Like for a Gen 3 starter..), And are are all the gen 2 turbo tailshafts the same? ( Or do i use a gen 3 tailshaft....) As I have been informed that is so.

Also , I use a TII input spline Clutchplate?

thanks in advance

Pete

Title: RX8 tailshaft and a 13b series4 starter...
Post by: 88GT-R on September 14, 2007, 02:04:07 AM

Hi Buddy,

Only FD starter, and FC push type clutch assembly is good.

John

Title: RX8 tailshaft and a 13b series4 starter...
Post by: Kaptainbalistik on September 14, 2007, 02:06:25 AM

Series 4 Tailshaft uni is Good!, Now for a starter and clutch and flywheel, And to weld drill and tap 2 lugs for the RX2 clutch slave

Mazda Rotary Club

General => General Technical => Topic started by: Kaptainbalistik on September 13, 2007, 05:23:05 AM