Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: dboy on September 10, 2007, 10:23:37 AM

Title: Fresh Rotary Meat
Post by: dboy on September 10, 2007, 10:23:37 AM
Hi All,
 
First post and thought i had better introduce myself. My names Jason, but peeps have called me dboy online and offline since for about the last 22 million years, so much so that i even have dboy persoanlised into my bike leathers.
 
Reason for joining is of course a love of the RX7. I recently sold my lovely BMW 744 (aplian tweaked) and moved from just south of Leeds in Yorkshire to a lovely 100year old cottage in Townhill, just outside Dunfermline in Fife.
 
Finally persuaded the missus that once the house in Leeds sells then i can get my dream car the RX-7, providing she gets her Lotus Elise. Fair enough i said and so the research began.
 
Having little knowledge of the rotary engine excep for its renown capabilities i started looking around for some good forums / communities that might be willing to help me in my search for a car and also with any issues i might have. Its important to have a good community that get together when possible as well.
 
Well that little quest for information led me here to you guys, so last thursday i joined the forum and began furtievly reading up on what i could to start making my decision on what to go for.
 
First a bit about me so you can decide wether i would be welcome in your great community
 
I am basically a 34 year old adrenalin lovin IT geek. Been a contractor in the IT market for a bout eight years now, owned lots of nice rides, recently got rid of my BMW 744, but still got my baby a Ducati 998 Testastretta. a one liter v-twin of immense proprtions.
 
What i am hoping you guys will help me with over the coming months is to decide on what to buy RX-7 wise. At the moment i dont know wether to get a project car ie spend about 4 or 5k on purchase and have another 4 or 5k to make her my own (including rebuilding her) or do i just bite the bullet and spend 8 to 10k on somethin like rixio\'s ride, which had my jaw dropping when i saw it.
 
anyway i figure whatever i decide there i will look for a \'92 - \'94 Jap imported FD3 just love those two rear seats...... think my mind is set towards a single turbo conversion as i know there is more room to play with power wise.
 
So basically guys and gals a huge hello from me, hope you can help me on my quest. Also any members who are around the dunfermline area that fancy meeting up and showing me round their pride and join and giving me some tips on what to look for would be great.
 
Is their any decent rotary support in Scotland ??
 
Cheers all.
dboy
Title: Fresh Rotary Meat
Post by: barmar on September 10, 2007, 01:07:35 PM
Hi dboy,

Welcome to Scotland and to MRC. Really there aint that many of us up here so the nearest rotary specialist is WGT in Middlewich. As you\'re planning on a single turbo you would probably be better getting one that has already had the bulk of the work done as it is by far the cheaper route. The downside to that is you don\'t always know who has done the work and wether it has been done to a good standard or not. Look for one that has had a recent rebuild by one of the specialists and you shouldn\'t have any problems.

Cheers
Barry
Title: Fresh Rotary Meat
Post by: thetera on September 10, 2007, 01:19:40 PM
Welcome dboy, I\'ve got a 998 too :D
Title: Fresh Rotary Meat
Post by: dboy on September 10, 2007, 01:52:47 PM
Quote from: barmarHi dboy,
 
Welcome to Scotland and to MRC. Really there aint that many of us up here so the nearest rotary specialist is WGT in Middlewich. As you\'re planning on a single turbo you would probably be better getting one that has already had the bulk of the work done as it is by far the cheaper route. The downside to that is you don\'t always know who has done the work and wether it has been done to a good standard or not. Look for one that has had a recent rebuild by one of the specialists and you shouldn\'t have any problems.
 
Cheers
Barry

Middlewhich !!!!!! so basically i just moved away from my nearest Rotary specialists the !!!! hmmmm must remind myself to have a go at the otehr half later. Thanks for the welcome Barry, cant wait to try the roads out up here with a decent motor, and the bike, now living 4 miles from Knockhill yeeharrrrr.
 
Thanks for the pointers when picking up a decent single as well, Gonna need all the the help i can get by the time spring gets here which is when i will look to spend the cash.
 
Quote from: theteraWelcome dboy, I\'ve got a 998 too :D

Thanks thetera, good to meet a fellow biker on here aswell, let alone someone with a 998, hope you enjoy yours as much as i enjoy mine. :D
Title: Fresh Rotary Meat
Post by: thetera on September 10, 2007, 01:56:38 PM
Yep, I\'ve done over 20 trackdays on it since I bought it in 2002, apart from a loose clutch hub nut it hasn\'t missed a beat :D
Got forged mags, 998r ECU and cams, ohlins forks and a 54mm system - 139hp at the wheel!
I\'m getting funds together to get an RX7 soon too :burnout
Title: Fresh Rotary Meat
Post by: Paul1982 on September 10, 2007, 02:10:35 PM
Hi Dboy and welcome!!
 
Beautiful bike you have mate (love them). I personally think if i had the money and time i\'ve buy a shell - there are a few amazing engines for sale around (e.g. a 500bhp engine with clutch loom and gearbox on here for £5k\'ish). Then set the car up with the kit you want.
 
£1500-£2k for nice shell - £5k for 500bhp engine - £1500 alloys and suspension and £500 paint work. £8k and you could have you personal RX with some serious grunt!!
 
But whatever you choose you\'ll get all the help you need here as i\'ve found these guys 2 b very helpful!!
Title: Fresh Rotary Meat
Post by: dboy on September 10, 2007, 02:21:16 PM
Hi Paul,
 
Thanks for the welcome, had thought of doing a full on project, but not sure i got room in the garage, we got mine and the other halfs ducatis, plus her elise at the minute, so space is as tight as a yorkshiremans wallet....
 
:eek: :eek:
Title: Fresh Rotary Meat
Post by: dboy on September 10, 2007, 02:26:21 PM
Quote from: theteraYep, I\'ve done over 20 trackdays on it since I bought it in 2002, apart from a loose clutch hub nut it hasn\'t missed a beat :D
Got forged mags, 998r ECU and cams, ohlins forks and a 54mm system - 139hp at the wheel!
I\'m getting funds together to get an RX7 soon too :burnout

Sounds like a nice setup fella. mine is nice and simple, i got 50mm carbon termis, and an egine service and tune by Paul Clattervich, ex ducati superbike engine builder..... the man is a god. gave it to him for a service and a tune, bearing in mind mine is the 998 biposto, he gave it back with 136hp at the wheel !!!! never met anyone that knows more about every single duc ever made than that man.
Title: Fresh Rotary Meat
Post by: Paul1982 on September 10, 2007, 03:24:32 PM
You could aquire all the parts at the sametime and get someone else to fit them for you.
 
So what elise have your misses got - i had an S1 Bell&Colvill super 160 and i thought it was awesome!!! 0-60 in 4.9 and i got it over 140mph (scarey) lol - I def want another one before i get 2 old :-)
Title: Fresh Rotary Meat
Post by: M@r]{ on September 10, 2007, 03:53:30 PM
Welcome Dboy  :Thumbs-up

Sounds like you have good taste in cars  :)   There are a couple of us on here with RX7\'s and Elise\'s   :burnout

One bit of advice - test drive a good twin turbo before discounting them.  I personally would never go single - I much prefer the drivability and low down grunt of the twins.  You can get some good power from the twin turbo setup too - upto 400bhp (more if you get uprated twins)   And on the drag strip they can perform well as you dont have to hold the car at 4000+rpm\'s to get a good launch  ;)   I think unless you\'re planning to try to get to 500bhp or more you are better off with the twins  (ready for a :flamed now )  But all this is just IMHO  :)

As for the Elise - if you can stretch to it get an S2 - your missus will find it a lot easier to get in and out of an S2   :p   Although its still not something she she try to do in a short skirt - not unless she wants to do a Britany Spears  ;)  The S2 is a lot more forgiving on a standard set up, the S1 is known to be tail happy.  Although getting the Geo adjusted can improve this.
Title: Fresh Rotary Meat
Post by: dboy on September 10, 2007, 04:07:31 PM
Paul, yeah your right i could do that, will keep the idea in the melting pot while the moeny pot grows to a suitable size. Also worded my previous post wrong, She hasnt got the Elise yet but she will be getting it before xmas when she finds the one she wants, which means it will def be in the garage before i get my rex.
 
M@r (M@r)]{, didnt think you could easily get a set of twins up round the 400hp without spending serious cash. to be honest I do prefer low down grunt and severe torque, thats why i ride a v-twin and not an inline 4 on the bike front.
 
Well i guess i need to find some suitable MRC members somewhere near edinburgh that would take me out in there babies, a single and a twin so i could compare.
 
Naturally i would bring my shell card and beer vouchers with me :D
 
and thanks for the pointers on the s2, will check it out and see if we can budget for that too, she might have to be extra nice though !!!
 
M@r]{ how do you find the insurance ? i notice your about my age so prob have a few years no claims as well, i was paying about £800 fully comp on my 744 last year and i think that was a group19 i know postcodes can have a huge effect but my bike insurance has dropped £150 with the move so pretty sure the car insurance will aswell.
 
Cheers
dboy
Title: Fresh Rotary Meat
Post by: interloper393 on September 10, 2007, 04:19:32 PM
Welcome bud, im down Ayr way so an hour fae u lol.. theres no rx7 specialist in Scotland at all :( best bet is Mark at The Garage in Wishaw...
Title: Fresh Rotary Meat
Post by: dboy on September 10, 2007, 04:30:53 PM
Quote from: interloper393Welcome bud, im down Ayr way so an hour fae u lol.. theres no rx7 specialist in Scotland at all :( best bet is Mark at The Garage in Wishaw...

well an hours not so bad, mihthave to persuade you to give me a ride to try one out sometime !!
 
Looks like i am resigned to big mileage when i want any mods and stuff done to the beast when i find one to buy then...
Title: Fresh Rotary Meat
Post by: M@r]{ on September 10, 2007, 05:03:50 PM
Insurance isnt too bad - both cost about £400 a year.  The RX7 is on a classic second car policy with agreed value.  I have around 4-5yrs NCB but a big claim in the last 3 yrs - fault claim - killed my S2000 so they paid out £15k!

I use AON for the RX7 and A-Plan for the Elise - both mod friendly which helps  :)

Quote from: dboyM@r]{ how do you find the insurance ? i notice your about my age so prob have a few years no claims as well, i was paying about £800 fully comp on my 744 last year and i think that was a group19 i know postcodes can have a huge effect but my bike insurance has dropped £150 with the move so pretty sure the car insurance will aswell.
 
Cheers
dboy
Title: Fresh Rotary Meat
Post by: gsb876 on September 10, 2007, 05:38:24 PM
Welcome to MRC bud,

Take your time and find the right rx7 for you, i found it better to buy a car with everything already done so you dont spend months trying to get this part or that apart and then cart it around the country getting everything done professionally - unless you can do it yourself of course ?

Also take a few out for a test drive and see which one you prefer ie Twin or single turbo jobbie\'s :Thumbs-up

Enjoy your stay mate,

Gurj :)
Title: Fresh Rotary Meat
Post by: philiwily on September 10, 2007, 06:33:01 PM
gives a shout next time your coming into edinburgh i will give you a blast in mine no probs. totaly standard.
Cheers Phil.
Title: Fresh Rotary Meat
Post by: interloper393 on September 10, 2007, 06:48:43 PM
i`ll take u out in ma drift spec rex, still on twins n im sure n4bes a take u fer a spin in his single lol.. theres a meet on the 22nd fer us scottish peeps if u cn make it :) closest specialist is wgt, but im not using him again as im finding him way to expensive and not the most helpful.. just my experiance tho..
Title: Fresh Rotary Meat
Post by: n4bes on September 10, 2007, 07:17:46 PM
How do............................

I\'m in Dunfermline mate, just along from the crem....................

If you see the car in the drive just pop in an i\'ll take you for a wee blast...................
Title: Fresh Rotary Meat
Post by: FD3SNuttah on September 10, 2007, 08:19:42 PM
welcome to the forum. Theres a few of us here in IT.

if you get an Rx remember that you will need a petrol station that sells 99 ron or optimax! dont know how close you will be to one.

up in scotland you have nice windy roads, and in that sorta playground id defo go for a modified twin turbo. You will need instant acceleration and tbh you wont be able to drive a big single very quickly without having to try and keep it on the boil and that might make it a bit scary on narrow roads!

i dont know how you scottish owners manage your FD\'s in all that rain?!!!

Good luck in the hunt for a nice FD.
Title: Fresh Rotary Meat
Post by: dboy on September 10, 2007, 08:20:10 PM
Quote from: philiwilygives a shout next time your coming into edinburgh i will give you a blast in mine no probs. totaly standard.
Cheers Phil.

Phil, I work in Edinburgh fella. 2 minutes from Waverley station, maybe we could sort something out after work one night ? What spec is your beast my good man.
 
Quote from: interloper393i`ll take u out in ma drift spec rex, still on twins n im sure n4bes a take u fer a spin in his single lol.. theres a meet on the 22nd fer us scottish peeps if u cn make it :) closest specialist is wgt, but im not using him again as im finding him way to expensive and not the most helpful.. just my experiance tho..

w00t w00t interloper that would be grand fella, would love to try out your drift spec twins, A meet on the 22nd you say ? where and when ? any problem if i turn up with the missus in the old volvo 850 bus ?
 
 
Quote from: n4besHow do............................
 
I\'m in Dunfermline mate, just along from the crem....................
 
If you see the car in the drive just pop in an i\'ll take you for a wee blast...................

Damn... you are close. would be great to see what your singles like, maybe sort something out this weekend if you have time ?
 
Seriously guys thanks for the welcome and all the help with this. Never expected anything like this response on my first day here. Hopefully in time I will be able to give something back to this great community.:god :god :god
Title: Fresh Rotary Meat
Post by: dboy on September 10, 2007, 08:26:58 PM
Quote from: TURBOIINUTTAHwelcome to the forum. Theres a few of us here in IT.
 
if you get an Rx remember that you will need a petrol station that sells 99 ron or optimax! dont know how close you will be to one.
 
up in scotland you have nice windy roads, and in that sorta playground id defo go for a modified twin turbo. You will need instant acceleration and tbh you wont be able to drive a big single very quickly without having to try and keep it on the boil and that might make it a bit scary on narrow roads!
 
i dont know how you scottish owners manage your FD\'s in all that rain?!!!
 
Good luck in the hunt for a nice FD.

 
Thanks for the pointer turbo, didnt think to take into account the general driving conditions lad, nice one. i aint a scots man yet, still a wannabe yorkshire man hahah gonna have all of scotland saying "m\'off t\'pub" within 10 years hahaha plenty of petrol stations up ere, we even got running water and electricity in townhill now hahaha  :chat :chat :chat
Title: Fresh Rotary Meat
Post by: n4bes on September 10, 2007, 08:31:51 PM
No worries dude, got a wedding Saturday so will be kicking about on Sunday most of the day.

The details of the meet are on here mate,

http://clanjapan.freeforums.org/index.php

You can always park the Volvo in another street and walk round.............lol.
Title: Fresh Rotary Meat
Post by: dboy on September 10, 2007, 08:44:46 PM
oh cr4p thats done it, told the missus about the volvo.... she wants to know how old you are and your real name, cuz she lived here for all her life before she moved to leeds to live with me a couple of years back. She\'s always been in to her cars so she might know ya.
 
She used to have a rover coupe with a k-type engine.
Title: Fresh Rotary Meat
Post by: n4bes on September 10, 2007, 08:56:21 PM
I\'ve only lived here for a year and a bit mate, stayed in Dundee before that.

Alot of my family live around here, cousins uncles and the like.

My name is Neill Forbes, hence the n4bes.....................................lol.
Title: Fresh Rotary Meat
Post by: philiwily on September 10, 2007, 11:25:12 PM
Sounds good mate i live in sunny portobello which is just 10 mins away. mines a 94 import totaly standard. would give a good idea of how far you want to tune yourself. do you work saturdays?
Phil
Title: Fresh Rotary Meat
Post by: RedRummy on September 10, 2007, 11:31:45 PM
Welcome mate!! you\'ve come to the right place.

:)
Title: Fresh Rotary Meat
Post by: Mims on September 11, 2007, 12:15:50 AM
Welcome dude... ashame you moved away from Leeds dude, bit unfortunate you moved to Scotland of all places sheesh! (joking lol). Building a rex is not as cheap as you think as you can get seriously carried away with it! If you can control yourself then you should be ok. A small/mid sized single should be good for Scottish roads as they are mint up there! Single\'s are awesome, put a smile on your face when you hit boost! More then welcome to come check out Rixio\'s lol :Laugh. Seriously though cant beat a big single on boost although be aware that you will stop thinking that you are driving fast after a while.
Title: Fresh Rotary Meat
Post by: dboy on September 11, 2007, 09:12:15 AM
Quote from: philiwilySounds good mate i live in sunny portobello which is just 10 mins away. mines a 94 import totaly standard. would give a good idea of how far you want to tune yourself. do you work saturdays?
Phil

woohoo yeah thats pretty close for sure, what you doing lunchtime hahaha
Work on Saturdays ?? what kind of crazy fool do you take me for ? No I dont work weekends at all if i can possibly help it. Why what you thinking ?
Title: Fresh Rotary Meat
Post by: dboy on September 11, 2007, 09:19:07 AM
RedRummy - Cheers for the welcome mate, yeah I agree with you reckon i couldnt have picked a better more friendly forum to join.
 
Mims - Yeah not expecting it to be too cheap to get the car i really want to end up with but hey I am ready for that. Well I Still own another house down Leeds way do maybe next time i am down I could arrange to see Rixio\'s ;-) as far not thinking I am driving fast after a while, you should scroll up and see i just sold a 744 and i ride a Ducati 998 fella ;-) say no more, say no more nudge nudge, wink wink.... Cant beat Snakes pass flat out !!!
Title: Fresh Rotary Meat
Post by: rico2k_uk on September 11, 2007, 09:48:51 AM
welcome mate! i\'m in perth (so quite close!) and a new rx7 onwer ;)
Title: Fresh Rotary Meat
Post by: dboy on September 11, 2007, 09:54:37 AM
Quote from: rico2k_ukwelcome mate! i\'m in perth (so quite close!) and a new rx7 onwer ;)

Woohoo another close rex owner :D things are looking up :Thumbsup! :Thumbsup!
Title: Fresh Rotary Meat
Post by: Mims on September 11, 2007, 05:31:03 PM
Quote from: dboyCant beat Snakes pass flat out !!!

Too right! Let me know next time you coming down buddy :)
Title: Fresh Rotary Meat
Post by: dboy on September 12, 2007, 10:17:56 AM
will do fella have no fear. My Ducati\'s down there at the minute have some more "work" done to the engine. hoping to get her back with over the 145hp at the rear wheel, i know another 10hp doesnt sound much, but on a bike it can make quite a difference ;-)
 
Mr Forbes my good man, whats you mail addy and i will drop you my mobile number if your still up fo sunday at some point ? providing your not too smashed still from the wedding on saturday !!
Title: Fresh Rotary Meat
Post by: philiwily on September 13, 2007, 03:08:51 AM
Reason i asked about saturday its best day for me, but no problem catching up with you through the week
 
Phil
Title: Fresh Rotary Meat
Post by: dboy on September 13, 2007, 08:58:05 AM
Quote from: philiwilyReason i asked about saturday its best day for me, but no problem catching up with you through the week
 
Phil

I am sure a saturday is fine, i think Portobello is about 40mins drive from me in Townhill, Cant do anything this saturday as its a full day of Rugby :D:D world cup and all that..... Mind you after we get pasted all over the pitch by south africa on friday i will be all upset :mad: :mad:
 
how about in a week or two Phil ? happy to work round you fella as your the one doing me the favour.
Title: Fresh Rotary Meat
Post by: n4bes on September 13, 2007, 09:10:08 AM
Quote from: dboyMr Forbes my good man, whats you mail addy and i will drop you my mobile number if your still up fo sunday at some point ? providing your not too smashed still from the wedding on saturday !!


Hi Mate, my mail address is n4bes@hotmail.co.uk

Anytime sunday suits mate, just not too early.........lol:guinness
Title: Fresh Rotary Meat
Post by: dboy on September 13, 2007, 09:17:12 AM
Quote from: n4besHi Mate, my mail address is n4bes@hotmail.co.uk (n4bes@hotmail.co.uk)
 
Anytime sunday suits mate, just not too early.........lol:guinness

You have mail. hmmm not sure joining this forum has done anything for my work efficiency :rolleyes: :rolleyes: