Hi, I\'ve been having boost probs for a while, basically i\'m getting fully boost after 4500 rpm but only about 3-5psi before. I\'ve tried changing all the solenoids, the turbo control actuator, all the rats nest, the vaccum chamber, the pills etc.But these did not work,now i\'m running increased boost, about 13-14 psi and I\'ve found a link to RX-owners club that seems to describe my problem and the fix, WOO HOO! But it says i need a pressure regulator: click (http://www.rx7club.com/showthread.php?t=480079)
Does any one know where to get one, i did a quick search on google but i only found industrial applications that deal with 300psi (i wish i got that much boost!) Does any one know where i can get a pressure regulator?
Thanks for any help guys and gals.
Rob :Thumbs-up
I got one off ebay last week for £7.50 , still to turn up though due to postal strike. Have you checked that you one-way valves are working. Im having a similar problem and found this page very helpful :
http://rx7.voodoobox.net/howto/solenoid_check/solenoid_check.html
Shaun
checked my one way valves, up to 20 psi with my mityvac. Stoopid me, didn\'t think of ebay. Cheers bud, i\'ll take a look
the regulator i\'m looking for would ideally be like this:
(http://rotaryproject.com/imagesforums/presureReg05.jpg)
If anyone has any ideas, tried ebay but no luck yet
another pic of what i\'m looking for:
(http://rotaryproject.com/imagesforums/presureReg01.jpg)
Hi Shaun
Thank you for your enquiry, pleased to quote;
NPT Version 3-4 weeks
1 off Pressure regulator R07-200-NNAA £39.25 3-4weeks
1 off Gauge 18013013 £12.50
or
BSP Version 2-3 days
1 off R07-200-NNAG 1/4 £39.25 18013013 - gauge £12.50
1 off Delivery
£8.50
Payment by credit card or proforma please
Regards
Simon Baxter
Electroquip Ltd
Glenmore Centre
Eurolink Estate
Sittingbourne
Kent ME10 3GL
Tel : 01795 473714
Fax : 01795 429364
Mob : 07768 841595
e-mail : simon@electroquip.co.uk
To: quote@electroquip.co.uk
Subject: Online Quote
The following information was submitted from a form on
www.electroquip.co.uk:
Company_Name: Private sale
End_User: on
Product_Description: Pressure regulator R07-200-NNAA , not sure if thats the
correct number. I\\\'m after R07 Regulator with a 1/4in inlet with a gauge
with a range of 0.1-0.7 bar. Im using it inline with 4mm Id pipe so unsure
what threads are required.
Cheers
Shaun Wilmer
Quantity_&_Target_Price: 1, price unknown
Quote from: Bobbitanother pic of what i\'m looking for:
(http://rotaryproject.com/imagesforums/presureReg01.jpg)
Please don\'t mount a regulator near the altonator like this because if you have even the smallest fuel leak you risk a big fire due to the sparks you get within an altonator !
The regulator would be for air pressure not fuel, so would it still cause this?
no, if it was for fuel then yes
Funny the fact that im in the middle of the same issues and doing the same thing...weird i was even looking at the same threads as above...