Mazda Rotary Club

General => General Technical => Topic started by: Ricco_04 on July 29, 2007, 05:35:52 PM

Title: Can anyone help?
Post by: Ricco_04 on July 29, 2007, 05:35:52 PM
Hi all,

Just wondering if anyone knows the answer to a problem i\'ve encountered (or indeed would be able to translate!!)

I am fitting the ReAmemiya flush lights to the car but can\'t decide where these two plugs go?  Here is a picture of the instructions showing the offending two plugs

(http://i16.photobucket.com/albums/b10/effazef/My%20FD/lasttwoplugs.jpg)

I would have thought there would be 2 plugs to go into the OE plugs but not only would they not reach both but one of the new plugs is male and the other female. :2Confused

Any help would be greatly appreciated :cheers
Title: Can anyone help?
Post by: chopper2k22 on July 29, 2007, 05:40:25 PM
Does one plug into the OEM loom and the other to there light ?? so acts like bridge to power the lights and relay power to the other side ??
Title: Can anyone help?
Post by: Ricco_04 on July 29, 2007, 05:43:43 PM
Afraid not matey.  There are other plugs for the new lights.  I should pop the complete piccie up aswell! :Hammer
Title: Can anyone help?
Post by: Ricco_04 on July 29, 2007, 05:46:59 PM
Hopefully this should limit a few things :

(http://i16.photobucket.com/albums/b10/effazef/My%20FD/DSC02365.jpg)

It\'s the only 2 plugs I have left to do but just have no idea what they could be :rolleyes:
Title: Can anyone help?
Post by: John_Hudson on July 29, 2007, 07:06:30 PM
Here is a pic of my wiring diagram for the KS, its almost the same except yours has that extra funny hanging bit

have you tried plugging it all in without that and seeing if it works?

(http://i36.photobucket.com/albums/e12/asthier/6-1.jpg)
Title: Can anyone help?
Post by: Ricco_04 on July 29, 2007, 07:19:28 PM
Quote from: John_HudsonHere is a pic of my wiring diagram for the KS, its almost the same except yours has that extra funny hanging bit

have you tried plugging it all in without that and seeing if it works?

Yeah that is pretty sameey!! :chat  I havn\'t tried to be honest - I shall give it a go now! :)
Title: Can anyone help?
Post by: Ricco_04 on July 29, 2007, 07:33:47 PM
Ok just been and tried it.

I plugged the male connector into the OE power connecter on the passanger side and left the female to do nothing (hmmmmm lol ;))

I seem to have everything!  Sidelights (although seperate unit,) main beam & full beam.  I even tried flashing the lights with all the rest turned off and that works too! :wiggle

Mr Hudson, you are a top man! :Thumbs-up

Just wonder what the other wire is for then!?? :Laugh
Title: Can anyone help?
Post by: John_Hudson on July 29, 2007, 07:37:00 PM
No worries bud, your most welcome.  No clue what the other one is for

Glad you got it working though! :D