Mazda Rotary Club

General => General Technical => I. C. E. & Electrical => Topic started by: John_Hudson on July 19, 2007, 07:28:50 PM

Title: Dial lights not working
Post by: John_Hudson on July 19, 2007, 07:28:50 PM
Hey im having a problem with my illuminated dial lights, when i put my side or full lights on the dials wont illuminate, ive traced the fuse to the internal fuse box but when i change it and try the lights again i can hear the fuse pop and there goes another one.  Im guessing its a grounding fault somewhere but im not even sure where to start : (

any idea\'s?

cheers

John
Title: Dial lights not working
Post by: John_Hudson on July 20, 2007, 02:56:34 PM
nobody ?   : (
Title: Dial lights not working
Post by: FD3SNuttah on July 20, 2007, 03:34:03 PM
im in the same boat after respraying my dash! :( im gonna have to take it apart and then see what i forgot to plug back in?!

has anything else stopped working on yours? does the dial lights share the same fuse with anything else?
Title: Dial lights not working
Post by: John_Hudson on July 20, 2007, 03:46:37 PM
Nothing else has stopped working, just the dial lights,  ive been looking through the wiring diagram if you have the PDF its on page Z 80 :)

Im actually out on the car now running over everything that i did before it went poop
Title: Dial lights not working
Post by: RedRummy on July 20, 2007, 03:46:44 PM
rebuild!!

;)
Title: Dial lights not working
Post by: John_Hudson on July 20, 2007, 04:50:13 PM
LOL, sorted it now :p

only things i had done were a boost controller and changed my shifter bush so just went over the controller wires made sure they were all tidy, ensured the earth was good as well and cleared up the wires under center console.
Seems to be working now although i cant really tell as the sun is blistering here!