Text only | Text with Images

Mazda Rotary Club

General => General Technical => Topic started by: Morrmat on July 19, 2007, 05:55:33 PM

Title: Adjustable FPR
Post by: Morrmat on July 19, 2007, 05:55:33 PM
Which is the best one to go for? Are all FPR\'s adjustable?

Cheers

Matt
Title: Adjustable FPR
Post by: Morrmat on July 21, 2007, 12:45:21 PM
:xconfused
Title: Adjustable FPR
Post by: gonzoninja on July 21, 2007, 05:03:41 PM
Nope some fuel pressure regulators are fixed.

Something like and Aeromotive FPR is a rising rate regulator
Title: Adjustable FPR
Post by: Ricco_04 on July 21, 2007, 06:32:45 PM
There is a Sard FPR in the for sale section ATM :)

I use one of them on mine with the guage so I could set up the fuel pressure.
Title: Adjustable FPR
Post by: Morrmat on July 23, 2007, 04:36:04 PM
so to make the SARD one adjustable all i need to do is buy the attatchment off of ebay?
Title: Adjustable FPR
Post by: John_Hudson on July 23, 2007, 05:19:09 PM
The attachment will allow you to plug it into the 2ndary rail then feed a line from that, i believe its the thread on the top of the fpr that adjusts the pressure
Title: Adjustable FPR
Post by: Ricco_04 on July 23, 2007, 05:22:08 PM
The only bit you can adjust is what pressure you want it to run at (from idle IIRC)  You adjust the two nuts on the top for this - you wont know if you have it right unless you have a guage attached which will tell you what the pressure is.

Hope that makes some sence! :)
Text only | Text with Images