anyone interested in one of these?? universal fitment and a must for all FDs if you dont currently have one, can help reduce water temps especially if you have a front mounted intercooler.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8064815015&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1
I have enquired with shine in the US about these and for one it is quite expensive for shipping but costs the same price for shipping for upto 15 undertrays.
So if you are interested let me know, if i can get enough interested can prob get the undertrays including shipping for about $150
ooh i like that, dont think it will fit with my condenser being lower tho =/
could just cut a bit out for the condensor to fit through :)
no one :xconfused i thought this would be a popular buy
you could make these for less than 75.00 its the shipping killing it..pce of ali or perspex and a bit of time getting the shape for 50.00 wld prob buy to save time but not 75.00 quid
Quote from: rx7veilsideyou could make these for less than 75.00 its the shipping killing it..pce of ali or perspex and a bit of time getting the shape for 50.00 wld prob buy to save time but not 75.00 quid
I\'ve just taken mine off the car to sort out the spliter, and believe it was supplied by R-magic. Its made of very thick fiberglass and the fitting is soooo good. I may get some copies made up while its off then so will be alot cheaper then buying from US...:rolleyes: :rolleyes: :Hammer :Thumbsup!
good idea get me a template in cardboard u must have loads from the shop and i can make a cheap copy or gary at rotary art can:Thumbs-up :Thumbs-up
Quote from: rx7veilsidegood idea get me a template in cardboard u must have loads from the shop and i can make a cheap copy or gary at rotary art can:Thumbs-up :Thumbs-up
aaahhhaaa i already have a guy who can get these done for me in 3 days.....:yes :rolleyes: :rolleyes: hmmmm so get your orders in people fast:confused: :wiggle
sounds good, who can get one for the best price?? :Thumbs-up
def up for one my undertray has been a bit mullered
How much matey?
I also got a metal fabrication guy behind me shop who can do these in ally...i will be getting quotes for both in FG or Ally next week. Had a good look at mine and it is moulded where it sits or bolt on to subframe just before the oil sump so fiberglass may be good and cheap option and should be round £75. This is my own estimate but will confirm next week with pics....oh and if mods do allow then we may have a group buy and save everyone few pennys...:2Rolleyes
sounds good im definetly interested :cheers
I don\'t want any more fibreglass on the front of my car :) I\'ve got a a crack in my bumper where I caught my tool box going into the garage. If it was polyeurathane it probably wouldn\'t have damaged it :(
definately interested too... i\'ll wait for the pics & prices! really need one.
Here is a picture of the R-magic under tray that was on my car. Its moulded round the anti roll bar. You will have to put holes in front of the tray according to your bumprer and may have to cut only slightly to fit properly. The back of the tray bolts under the subframe where the standard tray does + this one has extra metal plate in the middle so that it sits nice and flush with subframe.
The tray is at the bodyshop now and i will wait from you guys to see who would like one. The more we have the better cheaper price we will get.:Thumbs-up
me!!!! :Thumbs-up
1.sweetiewells
2.
3.
4.
5.
6.
7.
8.
9.
10.
Before i go into sorting out a group buy, i would like to get a go ahead from the mods as i dont want to upset any vendors on here....??? before i get :flamed
are they going to mold in fibreglass or ally
It will have to be done in thick fibreglass as its easier to mold + aly will weight more and will need to be coated in some sort of sealent to protect from water and rust etc.
The bottom of these will be coated in matt black paint.
I had a fiberglass one made up for my front at about 5mm in thickness, its taken tons of abuse without cracking. The only thing I\'ve found is that because I had the lip sprayed it tends to have the paint chipped off!
£75 would be a bargain as mine cost me £120! Although it does fit mine perfectly being a wide beastie!
The other benefit is it re enforces the front bumper providing support to the underside, aswell as making the car smoother underneath - as a big hole behind the front bumper will cause drag.
Well, I\'ve just got back from the body shop with the prices and 75quid each for 10 or more trays + 15quid delivery.
If we go for up to 5 then it will be 95 + delivery....still very good price imo as if you were to buy from the states then you will have to add shipping + duty and VAT once here and may not even turn up in one piece:eek:
well im up for that sounds good :D
nice one laeeq, thanks for doing this for us :cheers
will give you a ring later :Thumbs-up
let get a list going then ime up for one
anymore :spank
sorry mate but i might have to drop out, a bit skint at mo sorry
No problem...as if i cant get the numbers together to obtain a discount price so it will be a full price on singles at any time you need one unless i have 5 or more in next 2 weeks...:2Rolleyes
i\'m up for one definately!!
I\'ll definately have one laeeq as long as it will fit my Veilside front bumper
Just got a quote for ally ones in 3mm thicknes as that will be solid. The price of these is a bit on high side and its about 225quid + delivery. I thought its very steep but then he explained as there is lots of cutting to put it into right shape hence more labour charge. I could\'ve cut it myself but dont have the sharp cutting equipments and trust me its very hard without them for 3mm thickness. So both options are available at a cost:cheers
sorry......... so how much is the fibreglass one ??
right guys! now that we could not get a group buy going on these so if anyone wants these individualy then let me know? It will be £120 + delivery. so let me know? The ally ones can also be done too. I got the template for it.
thanks