Mazda Rotary Club

General => General Technical => I. C. E. & Electrical => Topic started by: jeted on July 03, 2007, 06:18:53 PM

Title: speedo and cruse contol not working in a 92 fd
Post by: jeted on July 03, 2007, 06:18:53 PM
is the problem likly to be with puse generator on gearbox or kph mph converter in dash
Title: speedo and cruse contol not working in a 92 fd
Post by: kev-yorks on July 03, 2007, 06:49:07 PM
Either one would cause your problem. easiest option is bypass the kph/mph converter see if that cures it then go from there.
Kevin
Title: speedo and cruse contol not working in a 92 fd
Post by: jeted on July 03, 2007, 07:13:55 PM
thanks

so cruse contole feed is of speedo not of puse jenerator directly
will have to strip down dash and have a look
Title: speedo and cruse contol not working in a 92 fd
Post by: kev-yorks on July 03, 2007, 07:31:07 PM
Not 100% sure on  rx7 but normally the feed enters the car in the ecu loom then splits from there.
Kevin
Title: speedo and cruse contol not working in a 92 fd
Post by: jeted on July 03, 2007, 07:37:51 PM
so probably puse jenerator
Title: speedo and cruse contol not working in a 92 fd
Post by: kev-yorks on July 03, 2007, 07:52:31 PM
depends a lot where in the loom the converter is wired in. Go with the easy option first which is bypassing the converter.
Kevin
Title: speedo and cruse contol not working in a 92 fd
Post by: jeted on July 03, 2007, 08:21:19 PM
will have to fined the converter  any idear what thay look like?
Title: speedo and cruse contol not working in a 92 fd
Post by: kev-yorks on July 03, 2007, 08:24:37 PM
Do a search on ebay then you can see the pics they are normally wired in the passenger footwell.
Kevin
Title: speedo and cruse contol not working in a 92 fd
Post by: jeted on July 03, 2007, 09:21:36 PM
had a good look round and cant find it in the car yet any idear how close to ecu thay are normaly  

ed
Title: speedo and cruse contol not working in a 92 fd
Post by: kev-yorks on July 03, 2007, 09:23:46 PM
its down to whoever does the wiring to be honest most wire it in that area because it is easy to get to and out of the weather.
Kevin
Title: speedo and cruse contol not working in a 92 fd
Post by: jeted on July 03, 2007, 10:18:17 PM
been reading wireing diagram for 94 lhd and looks like pulse generator feeds cloks and thgen cloks feed ecu and cruse so will folow mack root checking from ther ( will check at harnes plug under dash

ed
Title: speedo and cruse contol not working in a 92 fd
Post by: arrouk on July 03, 2007, 10:53:21 PM
it will prob be behind the clocks or in the passanger foot well in the loom that plugs into the main engine loom, id start at the clocks as its easy and then take the passanger seat out and check under the dash. dont for get the chip can be as small as your little finger nail.

matt
Title: speedo and cruse contol not working in a 92 fd
Post by: jeted on July 04, 2007, 08:20:44 PM
found converter and not the problem

it tuns out puse jenerator unpluged I am very happy

ed
Title: speedo and cruse contol not working in a 92 fd
Post by: arrouk on July 04, 2007, 08:32:39 PM
glad it was an easy fix for you bud.

matt