Got a question for you all...
I\'ve recently taken my spoiler off my FD, and obviously I\'ve been left with the four holes on the boot.
So I went through the process of filling these holes, then priming, then painting with colour.
The colour was what I was given when I got the car, the same candy red it was sprayed in. So I sprayed it in this colour. Let i dry etc, took all masking tape off, and the colour seems to be different, very slightly darker.
Now, I know the car was sprayed like 2yrs ago now, so maybe the red has faded slightly?? although I cant see why it would as its not as if its left outside much, as its always garaged.
So, I hoped that adding lacquering and then the \'polishing in\' would alter the colour a bit. But it doesn\'t have seemed to very much at all.
I am very happy with the finish, other than the colour.
So what I\'m asking is. Is there any way to alter that colour of the red I sprayed on??
Cheers,
Alex
reds are the worst colours to respray parts n blend in, youl fined youd prob need to do ther whole boot lid to hide the resparyed part
Had hoped you\'d reply!
You dont think there is anything I can do to try and hide it bit more than what it is now?
Alex
do you have a local paint supplyer near you? it it 2pk paint your using? you can add more thinners to dilute the paint more, depends what ratio`s the painter before used.. also if you take the petrol cap down to them they cn make it up better for you, or go to a bodyshop and they`ll mix up a perfect match..
Reds really are a pig lol.. i had to paint the whole bck rear quater n the door to blend in a bad key on ma m8s car.. grrr..
Also not sure if you cn still buy them but you cn get a colour kinda changer thing.. that u add at a drop at a time and it changes the colour lighter or darker.. hope that helps ya m8..
I see.. But theres nothing I can do for the paint thats on there now then ?
no bud, you can try g3 polish and a compund mop n machine and blend the colour a bit, should make it less noticable, but if yer like me,.. then knowing its slightly different bugs the crap out of you :S
it would only be a temp fix for now, as I plan to respray it all pearl white at somepoint anyway.
I\'ve got a sneaky feeling this G3 polish is quite expensive?! lol
i cn get it, the liquid bottle version for 12 a litre i think it was? really great stuff bud lol
i\'ll have to get myself some of that come pay day !
cheers matey
if you say its a candy paint did you use the correct base coat ??? know that candy apple red needs a silver base coat 1st thus making the finish brighter .
Do you know what, this is exactly what I was thinking yesterday. As I remembered my gf\'s old corsa had HOK candy paint on, and the base coat was shimrin\' silver.
Unfortunately I\'d remembered this too late and I\'ve used grey primer.
So you reckon this could be why I\'ve got the \'newer paint\' is slightly darker than the old paint??
it quite likely mate :0) grey is very differant to sparkly silver so the effect will be differant , candy is a semi transparent coloured top coat to make the silver a differant coulor ! hard as hell to match mate ive tried and failed in the past :0(
how silly of me!!
So its either, completely redo those bits?, or try this polish and hope for best result poss?!
personally Id say repaint
g3 aint really a polish bud its a rubbing compound a bit like t-cut but alot more harsh especially on single coat paint you may find you rub straight through it sorry , if at 1st you dont succeed try try an try again :0)
If its proper three stage Candy you have a problem, i would be tempted to blow into the Quaters if it was me doing the job.
But as its already said you need to know 1. the base colour 2. How many coats of candy 3. what make and Ratio to Binder 4. how many coats of Clear (and usaly what make)
How i do it is get a load of test Pannels and Base colour them all (as long as you have the correct Colour this won\'t change the end product) then start with two light coats on them all then put two to the side, three coats, two to the side etc until its gone way dark. Now let them all go off well and of the Two of each colour clear 1 with two coats of clear and two with three coats and dry (don\'t forget to mark up which is which). After all thats Dry you can get a good idea of How many coats of Candy you are going to have to put on and how many coats of Laqure to achive the correct sort of colour. As an example on a Candy car i recently painted i did aprox 20 spray out cards before i got a Colour i was happy with.
candys great fun :) if you do decide to Blow into the Quaters do some research, its important you reapply the base coule to the tops of the Quaters (where it mates up to the Gate) or it will just keep getting darker.
Bit of Advice, G3 is Messy and its hard work by hand ;)
Its often best to leave the Masking on or rough mask the area you are buffing, lots of people will tell you to add water as well, i use an old Window cleaner Sprayer bottle to keep it down to a Minimum (Water = Lots of spray = MESS) plus it waters the G3 down and it does\'nt cut as well.