Is this possible with out running into a host of problems?
If so any ideas on the ideal offset?
Hi mate
I have 8.5 front and 9.5 back and i dont think it would work to wellif i had the 9.5 on the front, with the 8.5\'s it sometimes rubs on the inside when on full lock and also i had to push the lip up on the arch aswell as it kept clipping. I guess it depends alot on if you have lowered your car and by how much.
Mate why do you want to put 9.5\'s on the front anyway??? Ive heard its not a good idea to go too wide on the front on any car, cant quite remember why thou lol
There are some in the US that are running that wide up front, but the offsets have to be spot on for it.
Sadly I dont know what they are.
Fish
I don\'t like the way that on some wheels the front ones look differant to the rear (bigger lip or deeper dish) when you run 2 differant widths!
Guess i\'m gonna have to do some research!
Just been having a look on RX7club.com and i think that if i go with 9.5x18 on the front with a offset as close to 50 as possible then they should fit!
Only one way to find out!
Quote from: Lum90Just been having a look on RX7club.com and i think that if i go with 9.5x18 on the front with a offset as close to 50 as possible then they should fit!
Only one way to find out!
mine are 50 offset from memory but only 8.5 j and they rub a dub dub on full lock but other than that fine ,, whats the worse that can happen can only rub for so long:Laugh
The CCW Setup is 10x18 all around with an offset around 50 I think.
Quote from: LRPmine are 50 offset from memory but only 8.5 j and they rub a dub dub on full lock but other than that fine ,, whats the worse that can happen can only rub for so long:Laugh
Thats only cos you\'ve got "westwood style" chrome 19\'s!
Balls to it i\'m just gonna order em!
Have you seen my other post as to what wheels i\'m gettin?
What do you think mate?
If you have some nice wide arches then yes ;) Feed recommend 18x9.5 with about a 24 offset.
I have standard arches unfortunatly. However i reckon a high offset and a large hammer should sort it!
I\'ve been wanting to know this for a while too.
I cant stand how the 8.5\'s aren\'t dished like the 9.5\'s. Some slightly stretched tyres will help pull the tyre under the arch too..
Can the front arch be rolled or pulled slightly to give more room? I haven\'t actually got my RX7 yet so i cant check.
You don\'t want to go that wide on the front. Your turn in will be terrible. The extra weight will affect braking as well. The feel will be awful, so my advice is don\'t do it. Go bigger on the back, but even then you need to check on your geometry to check all of the tyre will be used.
Quote from: AtomicRexYou don\'t want to go that wide on the front. Your turn in will be terrible. The extra weight will affect braking as well. The feel will be awful, so my advice is don\'t do it. Go bigger on the back, but even then you need to check on your geometry to check all of the tyre will be used.
What would you recommend for front arches whose manufacturers (Feed) recommend 18x9.5s?? Only solution I can see is sticking to 18x8.5 but with massive spacers?
Sorry for the thread hijack ;)
What size tyres would you be running? The other worry you get is keeping the balance between front and rear, otherwise you start inducing under/over steer :(
Quote from: AtomicRexWhat size tyres would you be running? The other worry you get is keeping the balance between front and rear, otherwise you start inducing under/over steer :(
For the rears I\'d be on 255/35, for the fronts I was thinking 245/35 as looking at the calculator this would keep the speedo almost dead on 60mph @ 60mph for front and rear.
i have to ask.... whay would you want 9.5 on the front? its the rearts that need to be wider. aswell as the issues of clearence etc and problems with turning circles also it wil put unescesary strain on the power steering. I have 9 inch wide wheels coming but thats for the fortune kit. really dont think you need 9.5. 8.5 tops!!!!!
Feed\'s track car runs 9.5s at the front and I think they know what they\'re doing. The wide arches allow it. They also run 9.5 on the rear even with their wider rear arches.
I\'ve fitted 10\'s all round on the FD with std arches ET 44 but I am running -3 camber , but I think we fitted them on the drifter aswell that only runs -1.5 - 2 camber
hope that helps you
Cheers
Darren
This may intrest you.
http://www.rx7club.com/showthread.php?t=647383&highlight=10+offsets
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=011&sspagename=STRK%3AMESE%3AIT&viewitem=&item=320108876555&rd=1,1
I was looking at buying these a while back but i thought 10" where TOO wide even though i realy do like the rims.