Does anyone know if this is a tricky job. Mine is wearing out. I had to take the door card out and give the motor a wee tap to get the window back up.
Thanks
not a big job really only about 5 bolts from memory, although a lot of these motors are getting tired now were you planning to replace it or rebuild it?
Mark
I think I will try to get replacement ones. If not I will get them re-wound. It looks like I have to unbolt the motor as you say, but some of the bolts there attach to the window movement. I am hoping that there are 2 bolts holding the motor, and a bit of fiddling will get the motor wind mechanism disconnected ready for a new motor.
I will have to see.
Thanks
Never had to change one. Check the door seals aren\'t too dry - dust talc or graphite into the vertical seals, particularly the seals inside the door.
I think it\'s just fiddling to get the motor out. Not tricky, just knuckle stripping!
are you sure its the motor as the switches are the unreliable bit
Quote from: MikeLMRare you sure its the motor as the switches are the unreliable bit
True enough pull the switch apart its amazing what you will find, may be a easier fix! plus i think you will struggle finding good motors now, i sold a pair for £80 but the guy had hand winders so anything would of been better!
Mark