Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: Adie Moore on May 28, 2007, 03:56:27 PM

Title: plastic in boot
Post by: Adie Moore on May 28, 2007, 03:56:27 PM
Before i break some thing, i thought i\'d ask... how to remove the plastic on the inside of the boot lid. i want to get at the rear wiper motor and the screws that hold down the spoiler. in particular the hangers for the parcel shelf.
cheers adie
Title: plastic in boot
Post by: Adie Moore on May 28, 2007, 06:36:19 PM
come on guys, do i just need to swing on it till it pops off or are their some sneeky screws somewhere.
Title: plastic in boot
Post by: PETE SMITH on May 28, 2007, 06:46:46 PM
Hi Adie,
There are loads of those black popper things and some of the plastic overlaps eg by damper insertions can be a bit fiddly-be careful there.
Just lever and pop and keep an ear out for twangy metal sounds as these are the metal wedge receivers for the poppers-can come off!
Basically, i took all the plastic off once and left it off!!-No draw backs to note.:)
Title: plastic in boot
Post by: Adie Moore on May 28, 2007, 06:51:41 PM
cheers Pete, i\'ll get stuck in then.

adie