Print Page - How to remove old head unit

Title: How to remove old head unit
Post by: vonrumble on May 25, 2007, 05:34:56 PM

Anyone got any ideas on how to remove the old tape head unit? Also does it use iso adaptors? Or will i have to wire it my self?:WaveBye

Title: How to remove old head unit
Post by: vonrumble on May 25, 2007, 05:35:59 PM

by the way its a 1988 n/a fc Uk spec

Title: How to remove old head unit
Post by: Brett on May 25, 2007, 05:48:18 PM

I cant recall if they ISO adapters or not, but heres what you need to do:-

Remove the plastic section at the base of the gear shift. (Just pulling it up is enough)
Remove the ash try. (It should just slide out)
I think you may have to remove the vents at this point to. (Been awhile since I last did this job on an EGI) They should just pull out, but be gentle as ther are very brittle.
Unscrew the screws that have now been revealed.
The whole center surround should be free to come forwards, bringing the head unit etc with it. From this point on you should be able to manage!

:wave

Any probs PM me.

Title: How to remove old head unit
Post by: grinder on May 25, 2007, 05:53:27 PM

you will need a ISO adaptor

they are Â£3.94 @ CPC

Title: How to remove old head unit
Post by: vonrumble on May 26, 2007, 12:28:46 AM

thanks for the help guys. :D

Title: How to remove old head unit
Post by: vonrumble on June 13, 2007, 08:08:54 PM

Any websites where i can get the iso adapter from though?

Title: How to remove old head unit
Post by: grinder on June 13, 2007, 08:18:06 PM

//www.cpc.co.uk
//www.maplins.co.uk
//www.ebay.co.uk

hows that :D

Title: How to remove old head unit
Post by: vonrumble on June 15, 2007, 03:54:55 PM

Cheers Matey

Title: How to remove old head unit
Post by: vonrumble on July 10, 2007, 07:36:53 PM

didnt end up buying iso, testers, crimps, and luck instead, works a treat, aint ever coming out!

Mazda Rotary Club

Cars by Model Type => 2nd generation RX-7's => Topic started by: vonrumble on May 25, 2007, 05:34:56 PM